Akurate ExaktBox

Getting Started

www.linn.co.uk/go/akurate

Product info

• Product Name: Akurate ExaktBox

• Date of Introduction: September 2014

• Type: Digital Crossover with Exakt Technology

Supports Stereo speakers from 2way to 5-way

Software upgradable to support more and more loudspeakers

Connects to power amplifiers and externally Aktiv speakers

• Can only be used wit Exakt-Link output products

• Features
  • Dynamik Power Supply
  • Exakt Technology

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Konfig manual

Exakt Optimisation

Exakt Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
3. ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
4. ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
5. FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).

Note: Both XLR and RCA outputs are active simulatneously.

Akurate Exaktbox connections

EXAKT LED Status

LED	OFF	ON	Flash / Blink
0 Master Port	No Link	Link Discovered	Link Activity
1 Audio Clock	No Clock	Clock locked	Clock not locked
2 Slave Port	No Link	Link Enabled	Link Activity
3 Software Status	Not Configured	Running	Hardware Fault

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking Information

• Positioning Information

• The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.

Exakt options

Exakt usage can be found in Klimax_Exakt_System

One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Exakt Optimsation & Exakt Optimisation (Advanced)

Supported speakers

Currently available using one Akurate Exaktbox

• pair Klimax / Artikulat 350
• pair Akubarik passive
• pair Akudorik passive
• pair Akurate 242 mk2
• pair Akurate 212 mk2
• pair Komri
• pair Keltik
• pair Espek
• pair Majik Isobarik
• pair Majik 140

Coming Soon

• Akurate 242 mk1
• Akurate 212 mk1
• Majik 109
• Ninka
• Katan
• Kaber
• Keilidh

non-Linn speakers

Currently available

1. B&W Nautilus

For further assistance, try our customer support pages or the Linn Forum.