Sekrit DS-I

Product info

• Product Name: Sekrit DS-I

• Date of Introduction: October 2009

• Type: Digital Stream Player.

• Features
  • DS Design
  • Dynamik Power Supply
  • Source Unity Gain option

Latest software

Latest software releases

Open source software

Manuals

Kinsky Desktop manual

Linn Konfig manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Network setup guide.

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
3. SPEAKER OUTPUTS - To connect to loudspeakers
4. ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled).
5. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) outputs.
6. RC5 IN, OUT - Allowing control of hidden Linn devices connected via their RC5 ports.
7. IR OUT 1 & 2'- Infrared flasher connectors. Allow the control of devices that accept infra-red signals.
8. RS232 PORTS - For connection to Linn source products without ethernet ports.
9. ETHERNET - For connecting the unit to the network.
10. SPDIF IN - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
11. TOSLINK IN - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.

Front Panel Connections

1. POWER SWITCH - For switching power to the unit on and off.
2. FALLBACK - Used when re-programming the unit.

LED FUNCTIONS

Text	ON indicates	OFF indicates	Slow Flash / Blink	Fast Flash
STANDBY	Device in standby	Device active	Searching for IP address (boot)	Fallback (reprogramme)
LINK	Ethernet link established	no link established	n/a	n/a
DHCP	DHCP IP address obtained	Default IP address obtained	n/a	n/a
AUDIO	Valid audio (digital inputs only)	n/a	Invalid audio (digital inputs only)	n/a
POWER AMP	Internal amplifier enabled	Internal amplifier disabled	Internal amplifier fault	n/a
RCU	Reserved for future use	Reserved for future use	Reserved for future use	n/a
SEARCH	n/a	n/a	Find me	n/a
TRANSMIT	Reserved for future use	n/a	n/a	n/a

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking - Please read the information on unpacking your Sekrit DS-I.

• Positioning - Please read the information on positioning your Sekrit DS-I.

• Important Information:Protection - The Sekrit DS-I features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.