Akurate ExaktBox
Contents
Getting Started
Product info
- Product Name: Akurate ExaktBox
- Date of Introduction: September 2014
- Type: Digital Crossover with Exakt Technology
- Supports Stereo speakers from 2way to 5-way
- Software upgradable to support more and more loudspeakers
- Connects to power amplifiers and externally Aktiv speakers
- Can only be used wit Exakt-Link output products
- Features
- Dynamik Power Supply
- Exakt Technology
Support
Latest software
Manuals
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
- ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
- ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
Note: Both XLR and RCA outputs are active simulatneously.
EXAKT LINK Connections
Example if you are using a Akurate DSM/1 to connect to an Akurate ExaktBox:
The Exakt-link cable can supply digital audio for up to EIGHT channels.
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right hand channel and Channel2 is left or right hand channel
Power Amplifier/Speaker connections
DOUBLE CHECK the wiring from the Exaktbox to power amplifier to speaker terminals!
If there are any mis-wires or wrong speaker definintions in the Exaktbox, you may blow the speaker drive units, so take care.
If this is the first connection use the standard Aktiv test scenario.
- Switch off ALL power amplifiers.
- Disconnect any power amplifier to speakers connections
- Set to a low volume value, e.g 40-50
- Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
- Connect respective (Bass or Mid or tweeter ot super-tweeter) power amplifier connection to the Bass connection (Bass or Mid or tweeter ot super-tweeter) of the speaker.
- Switch on the respective amplifier and play some Music. Check that you are only getting (Bass or Mid or tweeter ot super-tweeter) audio from that speaker drive unit.
- Stop the Music playing.
- Leave this cable connected go to Step4 and connect the next speaker drive unit in the list.
If you change speaker or variant, this may also change the Exaktbox terminations so DOUBLE CHECK
To see the Exaktbox terminations for each speaker click here
EXAKT LED Status
LED |
OFF |
ON |
Flash / Blink |
0 Master Port | No Link | Link Discovered | Link Activity |
1 Audio Clock | No Clock | Clock locked | Clock not locked |
2 Slave Port | No Link | Link Enabled | Link Activity |
3 Software Status | Not Configured | Running | Hardware Fault |
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.
Exakt options
Exakt usage can be found in Klimax_Exakt_System
One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Exakt Optimsation & Exakt Optimisation (Advanced)
Supported speakers
Currently available using one Akurate Exaktbox
Note: these speakers must be made externally Aktiv
- pair Klimax / Artikulat 350(Externally Aktiv 350's will need to be converted for use with the Exaktbox operation)
- pair Akubarik passive
- pair Akudorik passive
- pair Akurate 242 Mk1 & Mk2
- pair Akurate 212 Mk1 & Mk2
- pair Komri
- pair Keltik
- pair Espek
- pair Majik Isobarik
- pair Majik 140
- Pair of Ninka speakers bi-amped or Tri-amped
Coming Soon
- Majik 109
- Katan
- Kaber
- Keilidh
- AV5140
non-Linn speakers
Currently available
Example of use
For further assistance, try our customer support pages or the Linn Forum.