Akurate Kontrol (Ethernet)

Product info

• Product Name: Akurate Kontrol

• Date of Introduction: November 2010

• Type: Analogue Preamplifier

• Features
  • Dynamik Power Supply

Latest software

Latest software releases

Open source software

Manuals

Product Information / Quickstart Guide

Konfig manual

Kinsky Desktop manual

Remote Control manual

Safety Information

On-line warranty registration

Network Setup

• DS Budget System Setup
• DS Entry Level System Setup
• DS High End System Setup

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
3. FALLBACK - To put the device into Fallback mode (used when reprogramming).
4. ETHERNET - To connect to a network.
5. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.
6. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) outputs.
7. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
8. PHONO GROUND - To connect to a turntable grounding terminal.
9. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
10. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
11. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.

Front Panel Connections

1. MUTE BUTTON - Mutes/unmutes the audio
2. VOLUME ADJUST BUTTONS - Changes the volume up/down
3. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
4. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
5. SOURCE SELECT BUTTONS - Changes to the previous/next source
6. STANDBY BUTTON - Brings the unit in/out of standby
7. POWER SWITCH- Switches the power on/off
8. FRONT PANEL DISPLAY

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking - Please read the information on unpacking your Akurate Kontrol.

• Positioning - Please read the information on positioning your Akurate Kontrol.

For further assistance, try our customer support pages or the Linn Forum.