Configuration:Change Configuration

Change Configuration

Speaker

This allows you to add new speakers

Or delete the speaker setup by hitting the X on the right side of the listing

OR

Select Mode

This is ONLY for ExaktBox /Selekt products.

Typically you will have:

Mono: To work as an Exakt crossover for one loudspeaker

Stereo: To work as an Exakt crossover for a pair of loudspeakers

Stereo Passthrough: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.

Surround Passthrough: To define the Surround channels assigned and what loudspeaker is being used.

Selekt Speaker

Channel: This refers to the audio channel for this/these loudspeakers.

If you have set for Mono mode above, this will show single channels, FL, FR, Cen...

All other modes will allow to setup for channels pairs and single channels.

Manufacturer: This is the Manufacturer of the speaker attached to the defined channel. E.g. Linn

Model:This is the model of the speaker attached to the defined channel. E.g. Klimax 350

(In Mono & Stereo mode this is used for the Exakt crossover profile.

In Stereo Passthrough & Surround Stereo mode this is used for Space Optimisation and speaker distancing.)

In Surround Passthrough mode it will then ask you if you want to add more loudspeakers for more Surround channels

Confirmation Selection

This is to confirm your configuration and include any wiring diagrams before programming the system

The > X allows you to delete these channels from the configuration.