Template:Backpanel:Majik DSM 2020

Majik DSM (2020 variant)

1. MAINS INPUT - To connect to the mains electricity supply.
2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
3. ETHERNET - To connect to a network (100Base-T)
4. USB⁶ - To connect to a PC/MAC for Class 2.0 PCM USB Audio playback
5. DIGITAL INPUTS/OUTPUT (Spdif)⁵ - To connect sources with Spdif (RCA) digital sources. This can be configured as a SPDIF source with no volume control
6. DIGITAL INPUTS (Toslink)⁵ - To connect sources with Toslink (optical) digital outputs.
7. ANALOGUE INPUTS (RCA MM/line level)^{1 & 2} - To connect to Turntable with MM cartidge or source with RCA analogue output.
8. PHONO GROUND - To connect to a turntable grounding terminal.
9. ANALOGUE OUTPUTS (RCA,variable level)⁴ - To connect to an optional external power amplifier.
10. SPEAKER OUTPUTS - To connect to loudspeakers⁷
11. POWER SWITCH - Mains power switch
12. HDMI OUTPUT with ARC (HDMI)⁸ - To connect to a TV (This Majik DSM supports Audio Retun Channel (ARC))
13. HDMI INPUTS - To connect sources with 1.4 & 2.0⁸ HDMI outputs

Reference:
¹ Analogue inputs: 2V rms, impedance 10kΩ
² with ADC of 192kHz/24bit
³ RCA MM:

MM input impedance 47k, 100pf

MM max voltage (1kHz): 67mV rms. (Gain +40dB)

⁴ Analogue Output:

RCA - 2V rms, 300Ω

⁵ Digital inputs: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

SPDIF socket can be converted to an SPDIF output that will support up to 192KHz. This output is a fixed volume control output, that is, Volume Up/Down had no effect on this output.

⁶ USB Supported Sample rates: 44.1, 48, 88.2, 96, 176.4, 192
⁷ Max output power: 100W/channel into 4Ω load, 50W / channel into 8Ω load
⁸ HDMI 2.0 Supports HDCP 2.2 up to and including 60Hz UHD. We recommend using HDMI Certified cables