Template:General:Series3-301 TI Indicators

Series3 Touch Interface notifications

10. Volume indicator

Click for more....

. Primarily the outer ring is the volume level indicator.

This also has other indications:

⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either

⁃ Starting up, this typically takes 20-40seconds, or

⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket )

⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected

⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan

11. Linn icon

Click for more....

Normal operation with the Series-3 playing music

---

Linn symbol has a lower brightness level the Series3 speakers are MUTED

---

Linn symbol flashing shows that the Series3 searching for a partner Series3 speaker

---

If you do not have a live Wifi/network/LAN connection on the Series-3 then the Linn symbol on the dial will go red.
If you are select the HDMI-ARC input or Bluetooth to the Series3 speaker this red light will go out

If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.

---