Template:ModuleInfo:SELEKT DSM CARTRIDGE - 2Ch LINE OUT

From LinnDocs
Revision as of 10:35, 30 April 2019 by Yoda (talk | contribs)
Jump to: navigation, search

SELEKT DSM CARTRIDGE - 2Ch LINE OUT

Selekt-LineOut-Module.jpg


Linn part#       SK CLL1

Description:

This is a module with 2off line-level audio channels.
Each channel has both XLR & RCA outputs that can be used simultaneously.


DAC - Digital to Analogue Convertor


Option 1: Standard (Level-1)



Line Output:

RCA:

Output Level: 2V rms @volume 80

Output Impedance: 300Ω


XLR

Output Level: 4V rms @volume 80

Output Impedance:      600Ω


RCA & XLR


Standard Level-1 DAC THD+N: 0.0002%


Dynamic Range      114dB


Note:

  • DAC's are sold seperately and ONE DAC module MUST be fitted to the the cartridge to get audio from this cartridge.
  • Different DAC's modules can be used with each Selekt Cartridge.
Either
  • Standard (Level-1) Stereo DAC is the standard DAC.
or
or
  • Only one type of DAC module can be installed in each cartridge.
That is, You CANNOT have a Standard and a Katalyst DAC module installed in the same Line-level, Power-amplifier or Hybrid 1.1 catridge at the same time.
  • These Standard and Katalyst DAC modules are interchangeable in different cartridges in the same Selekt DSM.
However Organik DAC modules CANNOT be used with Standard and Katalyst DAC modules in different cartridges, in the same Selekt DSM
  • The Organik MONO DACs can ONLY be used in the Mono Line Out Cartridge
  • You CANNOT mix Organik Stereo cartridges with Organik Mono Line Out Cartridges
  • Warning: Changing Selekt Cartidge(s) or Module(s).
Applies to: All Selekt DSM variants
To reduce the risk of damage to your Selekt DSM:
  • The Selekt DSM MUST be disconnected from Mains power supply by BEFORE any cartridge(s) or module(s) are removed/Inserted.