DS & REM 019

Remote Control Handset Operations

The following functionality is available on Linn DS devices that have a front panel display. A remote control handset is required to invoke the functionality. A playlist must first be loaded to the device via a Linn compliant control point (Playlist source must be selected if available). 3rd party UpnpAv control points currently only support playlists of 1 track, so will not work (currently playlist sizes up to 1000 tracks are supported otherwise).

Metadata searching using navigation keys

• Insure playlist is loaded to device via a Linn compliant control point
• Enter playlist navigation mode by pressing any of the navigation keys (Up, Down, Right. Left is currently reserved for future use)
• You are presented with the Title of the current track
• Press the Up and Down keys to preview the rest of the tracks in the playlist by Title
• Press the Right key to toggle between Title, Artist, and Album preview
• In Artist and Album mode, the Up and Down keys will preview the next available Artist and Album available in the playlist based on the order the tracks were loaded
• Press the Select key (circle shaped key inside navigation arrow keys) to jump to the previewed track
• A naviagtion icon will appear on the display (shows four arrows). If the up or down arrows are missing, you have reached the top or bottom of the playlist respectively)
• Navigation mode will timeout after 10s of no navigation input (no new track will be selected)
• Cancel by pressing the DISP key

Direct track selection using digit keys

• Insure playlist is loaded to device via a Linn compliant control point
• Select the track number you wish to play by pressing the corresponding digit key
• For large numbers, simply press the digit keys in succession as required (digit will be reset to 0 if the value entered exceeds the maximum allowed)
• After 2s, the track number entered will be selected (invalid entries will be ignored)
• Press the left navigation arrow key to erase a digit if you have made a mistake
• Press the select key (circle shaped key inside navigation arrow keys) to immediately jump to the previewed track
• Cancel by pressing the DISP key

Fast skip using skip keys

• Insure playlist is loaded to device via a Linn compliant control point
• Device must be either playing or paused for skip to be invoked
• Single press of skip keys will select the next or previous track as normal
• Press and hold of the skip keys will preview the skip operation, and select the given track on release of the key
• The first 15 tracks are previewed in order, at which point the preview continues to increase exponentially
• Cancel by pressing the DISP key

NEW SECTION

Linn Remote Control Handset Operation with Linn DS

The following functionality is available on all Linn DS devices with IR controllability. If IR is not enabled on the Linn DS then this can be done via Linn Konfig.

Enable IR on the Linn DS

• open Linn Konfig.
• Select the Linn DS.
• Select the Configuration tab.
• Set Handset Commands Accepted to All, Dvd or Cd.

Configure Linn Remote Control Handset to work with Linn DS

• Press to enable DVD commands.
• Press then to enable CD commands.

Playlist Source

The Linn Remote Control Handset will be able to access any playlist that is currently loaded onto the Linn DS via a Linn compliant control point.

The playlist will remain loaded on the Linn DS until it is cleared via a Linn compliant control point or if the Linn DS is power cycled or the reboot command is selected from Konfig.

Playing music on the Linn DS from the Playlist

• Load a playlist onto the Linn DS via a Linn compliant control point .
• Press to select the Playlist source.
• Press to play music from the start of the playlist.

Navigating through the playlist

• Press for fast search forward or for fast search backwards.
• Press for next track selection or for previous track selection.

To stop music playing on the Linn DS

• Press to stop the music playing.
• Press to pause the music.