Difference between revisions of "Sekrit DS-I"

From LinnDocs
Jump to: navigation, search
Line 41: Line 41:
 
[[Image:Sekrit DSI rear.jpg|center|600x328px|Image:Sekrit_DSI_rear.jpg]] <br>
 
[[Image:Sekrit DSI rear.jpg|center|600x328px|Image:Sekrit_DSI_rear.jpg]] <br>
  
−
# '''POWER SWITCH'''- For switching the power to the unit on and off
+
# '''MAINS INPUT''' - For connection to the mains supply.
−
# '''MAINS INPUT''' - For connection to the mains supply. See Connecting to the mains supply.
+
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
−
# '''SPDIF IN 1 to 3''' - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
+
# '''RIGHT, LEFT SPEAKER''' - Amplified output for connection to loudspeakers.
−
# '''SPDIF OUT''' - For connecting to a device with a digital electrical (coaxial) recording device.
+
# '''ANALOGUE AUDIO OUT''' - Analogue audio output for connection to an external pre-amplifier or power amplifier if the internal volume control is enabled.
−
# '''TOSLINK IN 1 to 3''' - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
+
# '''ANALOGUE AUDIO IN''' - For connection to line-level source products such as a CD player, radiotuner, tape deck, etc.
−
# '''EARTH GROUND''' - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
+
# '''RC5 IN, OUT''' - Allowing control, via the handset, of hidden Linn devices connected via their RC5 ports.
−
# '''TOSLINK OUT''' - For connecting to a device with a digital optical recording device.
 
−
# '''RIGHT, LEFT SPEAKER''' - Amplified output for connection to loudspeakers
 
 
# '''IR OUT 1 &amp; 2''''- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
 
# '''IR OUT 1 &amp; 2''''- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
 +
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
 
# '''ETHERNET''' - For connecting the unit to the Internet router.
 
# '''ETHERNET''' - For connecting the unit to the Internet router.
−
# '''FALLBACK''' - Used when reprogramming the unit.
+
# '''SPDIF IN''' - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
−
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
+
# '''TOSLINK IN''' - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
−
# '''ANALOGUE AUDIO INPUTS 1 to 4''' - For connection to line-level source products, such as a CD player, radiotuner, tape deck, etc. INPUT 4 can be configured as a moving-magnet, moving-coil or line-level input (the factory setting is moving-magnet).
 
−
# '''PRE OUT''' - Line-level outputs for connection to an external power amplifier in a multi-amp or aktiv system.
 
−
# '''LINE OUT''' - Fixed volume outputs for connection to a tape recorder or other analogue recording device.
 
  
 
== '''Front Panel Connections''' ==
 
== '''Front Panel Connections''' ==

Revision as of 11:51, 30 October 2009

Sekrit DS-I front rightl RGB 72DPI.jpg

Product info

  • Product Name: Sekrit DS-I
  • Date of Introduction: October 2009
  • Type: Digital Stream Player.

Latest software

Latest software releases

Open source software

Manuals

Kinsky Desktop manual

Linn Konfig manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Recommended DS Network setup guide


Back Panel Connections

Image:Sekrit_DSI_rear.jpg


  1. MAINS INPUT - For connection to the mains supply.
  2. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  3. RIGHT, LEFT SPEAKER - Amplified output for connection to loudspeakers.
  4. ANALOGUE AUDIO OUT - Analogue audio output for connection to an external pre-amplifier or power amplifier if the internal volume control is enabled.
  5. ANALOGUE AUDIO IN - For connection to line-level source products such as a CD player, radiotuner, tape deck, etc.
  6. RC5 IN, OUT - Allowing control, via the handset, of hidden Linn devices connected via their RC5 ports.
  7. IR OUT 1 & 2'- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
  8. RS232 PORTS - For connection to Linn source products without ethernet ports.
  9. ETHERNET - For connecting the unit to the Internet router.
  10. SPDIF IN - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
  11. TOSLINK IN - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.

Front Panel Connections

Majik DS-I front.jpg
  1. MUTE BUTTON - Mutes and un-mutes the volume
  2. FRONT PANEL DISPLAY
  3. STANDBY BUTTON - Brings the unit out of, or puts into, standby
  4. VOLUME -/+ - Adjust the volume level
  5. HEADPHONE SOCKET - Accepts a 3.5 mm headphone jack
  6. AUXILIARY SOURCE SOCKET - For connecting a portable source, e.g. MP3 player. Accepts a 3.5 mm jack.
  7. SOURCE -/+ - Changes Sources

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Sekrit DS-I.
  • Positioning - Please read the information on positioning your Sekrit DS-I.
  • Important Information:Protection - The Sekrit DS-I features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.

Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Sekrit_DS-I&oldid=3177"