Difference between revisions of "Cartridge/Ekstatik"
m (→Key Points) |
m (→Key Points) |
||
| Line 41: | Line 41: | ||
| Stylus: | | Stylus: | ||
| Micro ridge | | Micro ridge | ||
| − | |- | + | <!-- |- |
| Wieght: | | Wieght: | ||
| − | | 7.5 grams | + | | 7.5 grams --> |
| − | |- | + | |- |
| Crosstalk: | | Crosstalk: | ||
| > 28dB | | > 28dB | ||
Revision as of 15:00, 2 November 2021
Ekstatik Cartridge
In order to better Kandid, we needed to look further afield, and at more varied materials. We conducted extensive experiments; auditioning different materials and configurations for the body, inserts, cantilever, suspension, windings and leads. The result is Ekstatik – the new jewel in the crown of the Linn cartridge range.
Note: Ekstatik requires at least 15hrs ‘burn-in’; we’ve found that performance continues to improve and reaches its peak after ~40hrs.
Key Points
• A micro-ridge stylus on a sapphire cantilever makes for an extraordinarily responsive cartridge.
• Featuring aluminium-bronze inserts, to reap the sonic benefits of this alloy.
• Bespoke honeycomb cut into the cartridge body means mass is reduced to our preferred sweet spot of close to 7g.
• Designed to outperform our Kandid MC cartridge.
| Introduction: | 2021 | |
| Type : | Moving Coil Tracking | |
| Impedance: | 12 Ohms | |
| Recommend capacitance: | 1 nF | |
| Recommended Load: | 100 ohms | |
| Output voltage: | 0.45mV @ 3.54 cm/s | |
| Stylus: | Micro ridge | |
| Crosstalk: | > 28dB | |
| Channel balance at 1kHz: | < 1dB | |
| Tracking force: | 2 gram | |
