Difference between revisions of "Template:Backpanel:Selekt DSM - one Power Amplifier Cartridge"
m |
m |
||
Line 7: | Line 7: | ||
# {{link:ETHERNET}} | # {{link:ETHERNET}} | ||
# <u>[[HDMI#HDMI_ARC|'''HDMI ARC''']]</u> - To connect to a TV Audio Return Channel (ARC) connection | # <u>[[HDMI#HDMI_ARC|'''HDMI ARC''']]</u> - To connect to a TV Audio Return Channel (ARC) connection | ||
− | # | + | # {{link:USB-B}} <sup>'''9'''</sup> |
# '''DIGITAL INPUTS''' (Toslink)<sup>'''5'''</sup> - To connect sources with Toslink (optical) digital outputs. | # '''DIGITAL INPUTS''' (Toslink)<sup>'''5'''</sup> - To connect sources with Toslink (optical) digital outputs. | ||
# '''ANALOGUE INPUTS''' (RCAline level)<sup>'''1 & 2'''</sup> - To connect sources with RCA analogue outputs. | # '''ANALOGUE INPUTS''' (RCAline level)<sup>'''1 & 2'''</sup> - To connect sources with RCA analogue outputs. |
Revision as of 10:51, 7 April 2021
Selekt DSM with integrated amplifier cartridge
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- ETHERNET - To connect to a network (100Base-T)
- HDMI ARC - To connect to a TV Audio Return Channel (ARC) connection
- USB-B socket - To connect to a PC/MAC for Class 2.0 PCM Asynchronous USB Audio playback 9
- DIGITAL INPUTS (Toslink)5 - To connect sources with Toslink (optical) digital outputs.
- ANALOGUE INPUTS (RCAline level)1 & 2 - To connect sources with RCA analogue outputs.
- DIGITAL INPUTS/OUTPUT (Spdif)5 - To connect sources with Spdif (RCA) digital outputs.
- ANALOGUE INPUTS (RCA MM/MC)2 & 3 - To connect a turntable with unbalanced (RCA) outputs.
- EXAKT LINK- To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II)
- PHONO GROUND - To connect to a turntable grounding terminal.
- POWER AMPLIFIER OUTPUTS6 ,7 & 8 - To connect directly to a pair of loudspeakers.
- POWER SWITCH - Mains power switch
Notes:
1 Analogue inputs: Input range adjustable 1V-4V rms, 10kΩ impedance
2 with ADC of 192kHz/24bit
3 RCA MM/MC:
- MM input impedance 47k, 100pf
- MM max voltage (1kHz): 67mV rms. (Gain +40dB)
- MC input impedance 100Ω 470p
- MC max voltage (1kHz): 5.5mV rms (Gain +54dB)
5 Digital inputs: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- From firware release Davaar 75 SPDIF1 can be converted to an SPDIF output that will support up to 192KHz. This output is a fixed volume control output, that is, Volume Up/Down had no effect on this output.
6 Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.
7 Power Amplifier outputs: Max 100W/4Ω, 50W/8Ω per channel, Gain 20dB
- The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.
8 Some Electrostatic speakers may require a modification to work with Linn Selekt Class-D amplifier. Please refer to the speaker manufacturers website for information.
9 USB Supported Sample rates: 44.1, 48, 88.2, 96, 176.4, 192