Difference between revisions of "Akurate Kontrol (Ethernet)"
(→Front Panel Connections) |
(→Front Panel Connections) |
||
| Line 59: | Line 59: | ||
# '''VOLUME -/+ BUTTONS''' - Changes the volume up/down | # '''VOLUME -/+ BUTTONS''' - Changes the volume up/down | ||
# '''HEADPHONE OUTPUT''' | # '''HEADPHONE OUTPUT''' | ||
| − | |||
# '''AUX SOURCE INPUT''' | # '''AUX SOURCE INPUT''' | ||
# '''SOURCE -/+ BUTTONS''' - Changes to the previous/next source | # '''SOURCE -/+ BUTTONS''' - Changes to the previous/next source | ||
# '''STANDBY BUTTON''' - Brings the unit in/out of standby | # '''STANDBY BUTTON''' - Brings the unit in/out of standby | ||
# '''POWER SWITCH'''- Switches the power on/off | # '''POWER SWITCH'''- Switches the power on/off | ||
| + | # '''FRONT PANEL DISPLAY''' | ||
== '''Installation''' == | == '''Installation''' == | ||
Revision as of 17:53, 13 December 2010
Contents
Product info
- Product Name: Akurate Kontrol
- Date of Introduction: November 2010
- Type: Analogue Preamplifier
- Features
Latest software
Manuals
System Setup
Recommended Network setup guide
Back Panel Connections
- MAINS INPUT - To connect to the mains supply.
- EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
- FALLBACK - To put the device into Fallback mode (used when reprogramming).
- ETHERNET - To connect to a network.
- BALANCED INPUTS - To connect sources with balanced (XLR) outputs.
- UNBALANCED INPUTS - To connect sources with unbalanced (RCA) outputs.
- PHONO INPUT - To connect a turntable source.
- PHONO GROUND - To connect to a turntable grounding terminal.
- BALANCED VARIABLE OUTPUTS - To connect to a power amplifier with balanced inputs.
- UNBALANCED VARIABLE OUTPUTS - To connect to a power amplifier with unbalanced inputs.
- UNBALANCED FIXED OUTPUTS - To connect to an analogue recording device.
Front Panel Connections
- MUTE BUTTON - Mutes/unmutes the audio
- VOLUME -/+ BUTTONS - Changes the volume up/down
- HEADPHONE OUTPUT
- AUX SOURCE INPUT
- SOURCE -/+ BUTTONS - Changes to the previous/next source
- STANDBY BUTTON - Brings the unit in/out of standby
- POWER SWITCH- Switches the power on/off
- FRONT PANEL DISPLAY
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- Unpacking - Please read the information on unpacking your Akurate Kontrol.
- Positioning - Please read the information on positioning your Akurate Kontrol.
For further assistance, try our customer support pages or the Linn Forum.
