MS OUTPUTS

Return to Manage systems guide

GENERAL SPACE DISPLAY SOURCES MUSIC OUTPUTS VOLUME PRIVACY REMOTE HDMI SURROUND WI-FI ADVANCED

OUTPUTS

These options are only a review of what MAY be available on your Linn DS/DSM. DIGITAL OUTPUT MODE This refers to the Digital output (if fitted/enabled) what outgoing sample rate will be and has NO volume control on this output in any setup.. Raw: Digital output is the original bit rate. 88/96kHz: Digital output is the either 88.2k or 96k. 176/192kHz:Digital output is the either 176/2k or 192k. Post EQ: 192kHz: Digital output for front left/right speakers with Space Optimisation.(Only available on some products, ONLY applicable to SPDIF1 and has NO volume control.) Disabled: No Digital output. Analogue output When Exakt speakers are set up on this Exakt DSM, then the analogue output is disabled, as this audio will NOT be in sync with the Exakt audio. If you want to have both analogue and Exakt front L/R outputs, this must be enabled. (Default: DISABLED) SPDIF Mode On some products, the SPDIF1 socket can be configured for an Output, instead of the default input. The Input or Output mode is set here. Set to Output and Digital Output mode Post EQ, this can also be used with Digital speakers.(This does not support volume controlled output.) Headphone Mode Select: Auto: To dynamically enable and disable headphones based on whether headphones are connected to the output jack. On: To force the headphone output to always be enabled. (No audio to loudspeakers). Off: To disable headphone output. (No audio action when inserting headphones). For the Selekt Edition & Selekt Classic/1 Subwoofer This is for use with Stereo playback only. If you have a Selekt cartridge configured for LFE Surround and your Subwoofer has two inputs, you can fed one input from the LFE output and the other Sub-woofer input from the SUBOUT output. Subwoofer Options: * ENABLED to enable these back panel outputs. * DISABLED to disable these back panel outputs. Subwoofer Filter Enabled SUBOUT L+R set by crossover frequency 60Hz, 80Hz, 120Hz . Disabled SUBOUT L+R crossover frequency 1kHz, the LHC/RHC audio is flat. Subwoofer Crossover Frequency If Subwoofer filter is enabled: 60 Crossover frequency 60Hz 80 Crossover frequency 80Hz 1200 Crossover frequency 120Hz Subwoofer Crossover Type Bass redirect Audio above the Subwoofer Crossover Frequency frequency is sent to the F+R cartridge(s) and Exakt speakers. (Audio below this frequency is redirected to the SUBOUT outputs.) Bass Reinforcement Audio to the F+R cartridge(s) and Exakt speakers is flat response.. Subwoofer Channels Mono L+R subwoofer combined into one output. Stereo separate LHC and RHC subwoofer outputs