Difference between revisions of "Configuration:Change Configuration"
m |
m (→Selekt Speaker) |
||
Line 25: | Line 25: | ||
::In <b>Surround Passthrough</b> mode it will then ask you if you want to add more loudspeakers for more Surround channels | ::In <b>Surround Passthrough</b> mode it will then ask you if you want to add more loudspeakers for more Surround channels | ||
<br><br><br><br> | <br><br><br><br> | ||
− | |||
======<u>Confirmation Selection</u>====== | ======<u>Confirmation Selection</u>====== |
Revision as of 09:51, 9 September 2022
Contents
Change Configuration
![Kk Speakers.png](/wiki/images/thumb/a/a3/Kk_Speakers.png/200px-Kk_Speakers.png)
Speaker
- This allows you to add new speakers
- Or delete the speaker setup by hitting the X on the right side of the listing
- OR
![KK Select Mode.png](/wiki/images/thumb/d/db/KK_Select_Mode.png/200px-KK_Select_Mode.png)
Select Mode
- This is ONLY for ExaktBox /Selekt products.
- Typically you will have:
- Mono: To work as an Exakt crossover for one loudspeaker
- Stereo: To work as an Exakt crossover for a pair of loudspeakers
- Stereo Passthrough: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.
- Surround Passthrough: To define the Surround channels assigned and what loudspeaker is being used.
![Kk Select Spkr.png](/wiki/images/thumb/c/c3/Kk_Select_Spkr.png/200px-Kk_Select_Spkr.png)
Selekt Speaker
- Channel: This refers to the audio channel for this/these loudspeakers.
- If you have set for Mono mode above, this will show single channels, FL, FR, Cen...
- All other modes will allow to setup for channels pairs and single channels.
- Manufacturer: This is the Manufacturer of the speaker attached to the defined channel. E.g. Linn
- Model:This is the model of the speaker attached to the defined channel. E.g. Klimax 350
- (In Mono & Stereo mode this is used for the Exakt crossover profile.
- In Stereo Passthrough & Surround Stereo mode this is used for Space Optimisation and speaker distancing.)
- Channel: This refers to the audio channel for this/these loudspeakers.
![KK Add Speakers.png](/wiki/images/thumb/2/2b/KK_Add_Speakers.png/200px-KK_Add_Speakers.png)
- In Surround Passthrough mode it will then ask you if you want to add more loudspeakers for more Surround channels
Confirmation Selection
- This is to confirm your configuration and include any wiring diagrams before programming the system
- The > X allows you to delete these channels from the configuration.