Difference between revisions of "Template:General:Series3-301 TI Indicators"
m |
m (→Series3 Touch Interface notifications) |
||
Line 6: | Line 6: | ||
:::⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either | :::⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either | ||
:::::⁃ Starting up, this typically takes 20-40seconds, or | :::::⁃ Starting up, this typically takes 20-40seconds, or | ||
− | :::::⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket) | + | :::::⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket [[image:Exakt-Sender.png|15px]]) |
:::⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected | :::⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected | ||
:::⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan | :::⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan |
Revision as of 07:27, 17 October 2019
Series3 Touch Interface notifications
10. Volume indicator
Click for more....
- . Primarily the outer ring is the volume level indicator.
- This also has other indications:
- ⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either
- ⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected
- ⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan
11. Linn icon
Click for more....
Normal operation with the Series-3 playing music
Linn symbol has a lower brightness level the Series3 speakers are MUTED
If you do not have a live Wifi/network/LAN connection on the Series-3 then the Linn symbol on the dial will go red.
If you are select the HDMI-ARC input or Bluetooth to the Series3 speaker this red light will go out
- If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.