Difference between revisions of "Template:General:Series3-301 TI Indicators"
m |
m |
||
| Line 5: | Line 5: | ||
:::⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either | :::⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either | ||
:::::⁃ Starting up, this typically takes 20-40seconds, or | :::::⁃ Starting up, this typically takes 20-40seconds, or | ||
| − | :::::⁃ Doing a software update. This should take less than 10minutes | + | :::::⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket) |
:::⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected | :::⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected | ||
:::⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan | :::⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan | ||
Revision as of 13:27, 16 October 2019
10. Volume indicator
Click for more....
- . Primarily the outer ring is the volume level indicator.
- This also has other indications:
- ⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either
- ⁃ Starting up, this typically takes 20-40seconds, or
- ⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket)
- ⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected
- ⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan
