Difference between revisions of "Template:ModuleInfo:SELEKT DSM CARTRIDGE - 2Ch LINE OUT"
m |
m |
||
Line 4: | Line 4: | ||
<u>Linn part#</u> {{tab}} <b>SK CLL1</b> | <u>Linn part#</u> {{tab}} <b>SK CLL1</b> | ||
<br><br> | <br><br> | ||
− | <u>Description:</u> | + | <BIG><u>Description:</u></big> |
:This is a module with 2off '''line-level''' audio channels. | :This is a module with 2off '''line-level''' audio channels. | ||
:Each channel has both XLR & RCA outputs that can be used simultaneously.<br> | :Each channel has both XLR & RCA outputs that can be used simultaneously.<br> |
Revision as of 10:51, 30 April 2019
SELEKT DSM CARTRIDGE - 2Ch LINE OUT
Linn part# SK CLL1
Description:
- This is a module with 2off line-level audio channels.
- Each channel has both XLR & RCA outputs that can be used simultaneously.
DAC - Digital to Analogue Convertor
Option 1: | Standard (Level-1) |
Line Output:
RCA: | |||
Output Level: | 2V rms @volume 80 | ||
Output Impedance: | 300Ω |
XLR | |||
Output Level: | 4V rms @volume 80 | ||
Output Impedance: | 600Ω |
RCA & XLR |
Standard Level-1 DAC | THD+N: | 0.0002% | ||
Dynamic Range | 114dB |
Note:
- DAC's are sold seperately and ONE DAC module MUST be fitted to the the cartridge to get audio from this cartridge.
- Different DAC's modules can be used with each Selekt Cartridge.
- Either
- Standard (Level-1) Stereo DAC is the standard DAC.
- or
- Katalyst (Level-2) Stereo DAC use the higher specification Katalyst DAC Architecture
- or
- Organik (Level-3) Stereo or Mono DAC use the higher specification Organik DAC Architecture
- Either
- Only one type of DAC module can be installed in each cartridge.
- That is, You CANNOT have a Standard and a Katalyst DAC module installed in the same Line-level, Power-amplifier or Hybrid 1.1 catridge at the same time.
- These Standard and Katalyst DAC modules are interchangeable in different cartridges in the same Selekt DSM.
- However Organik DAC modules CANNOT be used with Standard and Katalyst DAC modules in different cartridges, in the same Selekt DSM
- The Organik MONO DACs can ONLY be used in the Mono Line Out Cartridge
- You CANNOT mix Organik Stereo cartridges with Organik Mono Line Out Cartridges
- Warning: Changing Selekt Cartidge(s) or Module(s).
-
- Applies to: All Selekt DSM variants
- To reduce the risk of damage to your Selekt DSM:
- The Selekt DSM MUST be disconnected from Mains power supply by BEFORE any cartridge(s) or module(s) are removed/Inserted.