Difference between revisions of "Akurate DS"

POWER SWITCH- Switches the power on/off
MAINS INPUT - To connect to the mains electricity supply.
EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
ETHERNET - To connect to the network.
FALLBACK - To put the device into Fallback mode (used when reprogramming)
RS232 PORTS - To connect to other Linn products without ethernet ports.
BALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
UNBALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.

Front Panel

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

Check:

For further assistance, try our customer support pages

@@ Line 43: / Line 43: @@
 # '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
 # '''ETHERNET''' - To connect to the network.
-# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).
+# {{link:FALLBACK}}
 # '''RS232 PORTS''' - To connect to other Linn products without ethernet ports.
 # '''BALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.