Difference between revisions of "Klimax ExaktBox"
(→Power Amplifier/Speaker connections) |
(→Supported speakers) |
||
| Line 148: | Line 148: | ||
== '''Supported speakers''' == | == '''Supported speakers''' == | ||
Currently available using '''one''' Klimax Exaktbox | Currently available using '''one''' Klimax Exaktbox | ||
| − | * '''single Klimax / Artikulat 350''' | + | * [[Klimax_ExaktBox_Connections#Klimax_350|'''single Klimax / Artikulat 350''']] |
| − | * '''single Akubarik passive''' | + | * [[Klimax_ExaktBox_Connections#Akubarik!'''single Akubarik passive''']] |
| − | * '''single Akudorik passive''' | + | * [[Klimax_ExaktBox_Connections#Akudorik|'''single Akudorik passive''']] |
| − | * '''single Akurate 242 mk2''' | + | * [[Klimax_ExaktBox_Connections#Akurate_242|'''single Akurate 242 mk2''']] |
| − | * '''single Akurate 212 mk2''' | + | * [[Klimax_ExaktBox_Connections#Akurate_212|'''single Akurate 212 mk2''']] |
| − | * '''single Komri''' | + | * [[Klimax_ExaktBox_Connections#Komri|'''single Komri''']] |
| − | * '''single Keltik - Bass Bi-Amped''' | + | * [[Klimax_ExaktBox_Connections#Keltik|'''single Keltik - Bass Bi-Amped''']] |
| − | * '''pair Keltik - Bass Bi-wired''' | + | * [[Klimax_ExaktBox_Connections#Keltik|'''pair Keltik - Bass Bi-wired''']] |
| − | * '''pair Espek''' | + | * [[Klimax_ExaktBox_Connections#Espek|'''pair Espek''']] |
| − | * '''single Majik Isobarik''' | + | * [[Klimax_ExaktBox_Connections#Majik_Isobarik|'''single Majik Isobarik''']] |
| − | * '''single Majik 140''' | + | * [[Klimax_ExaktBox_Connections#Majik_140|'''single Majik 140''' ]] |
<br><br> | <br><br> | ||
''Coming Soon'' | ''Coming Soon'' | ||
| Line 171: | Line 171: | ||
==== non-Linn speakers ==== | ==== non-Linn speakers ==== | ||
Currently available | Currently available | ||
| − | # '''2 x B&W Nautilus ''' | + | # [[Klimax_ExaktBox_Connections#Nautilus|'''2 x B&W Nautilus ''']] |
Revision as of 16:00, 12 November 2014
Contents
Getting Started
Product info
- Product Name: Klimax ExaktBox
- Date of Introduction: June 2014
- Type: Digital Crossover with Exakt Technology
- Supports mono speakers from to 6-way
- Software upgradable to support more and more loudspeakers
- Connects to power amplifiers and externally Aktiv speakers
- Can only be used wit Exakt-Link output products
- Features
- Dynamik Power Supply
- Exakt Technology
Support
Latest software
Manuals
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- EXAKT LINK- To connect to Exakt compatible devices
- BALANCED OUTPUT 1 - 6 - To connect to power amplifiers. (300ohm output impedance)
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
LED Status
|
LED |
OFF |
ON |
Flash / Blink |
| 0 Master Port | No Link | Link Discovered | Link Activity |
| 1 Audio Clock | No Clock | Clock locked | Clock not locked |
| 2 Slave Port | No Link | Link Enabled | Link Activity |
| 3 Software Status | Not Configured | Running | Hardware Fault |
Power Amplifier/Speaker connections
DOUBLE CHECK the wiring from the Exaktbox to power amplifier to speaker terminals!
If there are any mis-wires or wrong speaker definintions in the Exaktbox, you may blow the speaker drive units, so take care.
If this is the first connection use the standard Aktiv test scenario.
- Disconnect any power amplifier to speakers connections
- Switch off ALL power amplifiers.
- Set to a low volume value, e.g 40-50
- Connect ONLY the Bass (or drive unit you are testiing shown in point7) power amplifier connection to the Bass connection (or drive unit you are testiing shown in point7) of the speaker.
- Switch on the Bass amplifier and play some Music. Check that you are only getting Bass audio from that speaker drive unit.
- Stop the Music playing.
- Leave this cable connected and repeat steps 3-7 repeating the test for each speaker individually in the order of
- Bass, Midrange, tweeter and super-tweeter
To see the Exaktbox terminations for each speaker click here
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.
Exakt options
Exakt usage can be found in Klimax_Exakt_System
One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Exakt Optimsation
Supported speakers
Currently available using one Klimax Exaktbox
- single Klimax / Artikulat 350
- Klimax_ExaktBox_Connections#Akubarik!'''single Akubarik passive'''
- single Akudorik passive
- single Akurate 242 mk2
- single Akurate 212 mk2
- single Komri
- single Keltik - Bass Bi-Amped
- pair Keltik - Bass Bi-wired
- pair Espek
- single Majik Isobarik
- single Majik 140
Coming Soon
- Akurate 242 mk1
- Akurate 212 mk1
- Majik 109
- Ninka
- Katan
- Kaber
- Keilidh
non-Linn speakers
Currently available
For further assistance, try our customer support pages or the Linn Forum.
