Difference between revisions of "Template:General:Series-3 Touch Interface"
m (→Series3-301 Touch Interface) |
m |
(One intermediate revision by the same user not shown) | |
(No difference)
|
Latest revision as of 08:53, 25 October 2019
Series3-301 Touch Interface
- Buttons keys
- Any Button - Wake Series3 301 from Standby/Sleep
Select the Favourite media/PIN# 11 or setup Self configure with button6Self Configure
Select the Favourite media/PIN# 21 or setup WiFi with button5WPS Wifi Setup
Select the Favourite media/PIN# 31 or setup Bluetooth with button4Bluetooth Setup
Select the Favourite media/PIN# 41 or setup Bluetooth with button3Bluetooth Setup
Select the Favourite media/PIN# 51 or setup WiFi with button2WPS Wifi Setup
Select the Favourite media/PIN# 61 or setup Self configure with button1Self Configure
- Volume DOWN2 - decrease volume
- Volume UP 2 - increase volume
- Multifunction button3: Pause/Play, Mute/Unmute, Standby
- Notes
1. FAVOURITE/'PIN BUTTONS1 - Personalised media selection Pins 1-6
Click for more....
- 1 A quick press of this button will select your PIN. For more information on PINS check the FAQ-What is a PIN
2. Volume button action2
Click for more....
- Quick press/Tap action
- Increment or decrement the volume level by one step.
- Press and HOLD
- continuously Increment or decrement the volume level until button has the volume level has reached 0 or maximum level.
- Quick press/Tap action
3. Multifunction button3 - Play/Pause, Mute/Umute, Standby
Click for more....
- Quick press/Tap action
- Toggle between Pause/Play if you are playing a Music stream such as a Playlist, Tidal, Qobuz, Spotify
- Toggle between Mute/UnMute if you are playing a Radio station, HDMI ARC input or Bluetooth connection
- Press and HOLD
- Go into Standby/Sleep mode
- Quick press/Tap action
Self Configure -Configure for use with or without Series3-302 speaker
Click for more....
![]() |
Add/Remove a Partner speaker setup procedure
(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) : | |
1. Connect or remove the Series3-302 speaker as required: | ||
* Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302 | ||
* Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302 | ||
2. Press and HOLD both buttons ![]() ![]()
| ||
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display. |
The On-line setup guide can be found https://www.linn.co.uk/setup
WPS Wifi Setup -Initial setup for use with your Wifi using WPS
Click for more....
- This is to setup the Wifi connection using the front panel buttons.
![]() |
WPS WIFI Setup procedure: | |
1. On your ISP Router, press the WPS button to start the connection process. | ||
* Check your Router manual on how start WPS pairing. | ||
2. On the Series3-301 , press and HOLD buttons ![]() ![]()
| ||
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display. |
- Or
Alternative Wifi Setup Method via Web Browser: | |
1. With the Series3-301 DSM out of Sleep mode | |
2. Go to the Wireless settings on your device (e.g. iPad) | |
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number> | |
4. Select this as the wireless network on your device (e.g. iPad) | |
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar | |
6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4) | |
7. Select the Wifi network you want to connect to | |
8. Enter the passkey for the Wifi network | |
9. Click on 'Set Network' |
Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons ,
&
for 2 seconds and this will forget your Wifi settings.
Bluetooth Setup -Initial setup to pair up your Bluetooth device, (iPhone, iPad, Alexa Echo, Android...), to the Series3-301
Click for more....
![]() |
Bluetooth Setup procedure: | |
1. On the Series3-301, press and HOLD buttons ![]() ![]()
| ||
2. On your Bluetooth device, setup this up for pairing and look for Linn Series 3. | ||
3. This Bluetooth pairing process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display. |
The On-line setup guide can be found https://www.linn.co.uk/setup