Difference between revisions of "Template:General:Series-3 Touch Interface"

From LinnDocs

Jump to: navigation, search

@@ Line 5: / Line 5: @@
 ;<big>Buttons keys</big>
 :Any Button - Wake Series3 301 from Standby/Sleep
-# [[image:PIN-1.png|30px]] <b>Select the Favourite media/PIN# 1<sup>1</sup></b> or <b>setup Self configure with button6<sup>Self Configure</sup></b>
+# [[image:PIN-1.png|30px]]<b>Select the Favourite media/PIN# 1<sup>1</sup></b> or <b>setup Self configure with button6<sup>Self Configure</sup></b>
 # [[image:PIN-2.png|30px]]<b>Select the Favourite media/PIN# 2<sup>1</sup></b> or <b>setup WiFi  with button5<sup>WPS Wifi Setup</sup></b>
-# [[image:PIN-3.png|30px]]: <b>Select the Favourite media/PIN# 3<sup>1</sup></b> or <b>setup Bluetooth with button4<sup>Bluetooth Setup</sup></b>
+# [[image:PIN-3.png|30px]]<b>Select the Favourite media/PIN# 3<sup>1</sup></b> or <b>setup Bluetooth with button4<sup>Bluetooth Setup</sup></b>
 # [[image:PIN-4.png|30px]]<b>Select the Favourite media/PIN# 4<sup>1</sup></b> or <b>setup Bluetooth with button3<sup>Bluetooth Setup</sup></b>
 # [[image:PIN-5.png|30px]]<b>Select the Favourite media/PIN# 5<sup>1</sup></b> or <b>setup WiFi  with button2<sup>WPS Wifi Setup</sup></b>
@@ Line 17: / Line 17: @@
 ;Notes:
 {{Hidden Text Box Header|IndexText=<b>1. '''FAVOURITE/'PIN BUTTONS<sup>1</sup>''' - Personalised media selection Pins 1-6 </b>}}
-[[image:PIN-1.png|30px]][[image:PIN-2.png|30px]][[image:PIN-3.png|30px]][[image:PIN-4.png|30px]][[image:PIN-5.png|30px]][[image:PIN-1.png|30px]]
+[[image:PIN-1.png|30px]][[image:PIN-2.png|30px]][[image:PIN-3.png|30px]][[image:PIN-4.png|30px]][[image:PIN-5.png|30px]][[image:PIN-6.png|30px]]
 :<sup>1</sup> A quick press of this button will select your PIN. For more information on PINS check the [[FAQs#What_is_a_PIN|<u>FAQ-What is a PIN</u>]]
 <!--{{GUIDE:PINS - What are they and how do I use them}}-->
@@ Line 41: / Line 41: @@
 {{Hidden Text Box Header|IndexText=<b>'''WPS Wifi Setup'''</b> -Initial setup for use with your Wifi using WPS}}
 {{Setup:Series3-Wifi}}
-: This is to setup the Wifi connection using the front panel buttons. This can also be setup using the <u>[[Konfig]]</u> software on a PC/MAC.
-::1. On your ISP Router, press the <b><i>WPS</i></b> button to start the connection process.
-:::Check your Router manual on how to do this as different Routers have different methods on how to perform a WPS process.
-::2. On the Series3-301, press and '''HOLD''' buttons '''2''' & '''5''' until the Series3-301 volume indicators start moving to show a scan.
-::3. This process is complete when the Series3-301 volume indicators are all illuminated  for a few seconds and return back to volume level display.
 {{Hidden text end}}
 {{Hidden Text Box Header|IndexText=<b>'''Bluetooth Setup'''</b> -Initial setup to pair up your Bluetooth device, (iPhone, iPad, Alexa Echo, Android...), to the Series3-301}}

Latest revision as of 08:53, 25 October 2019

Series3-301 Touch Interface

Buttons keys: Any Button - Wake Series3 301 from Standby/Sleep

Select the Favourite media/PIN# 1¹ or setup Self configure with button6^{Self Configure}
Select the Favourite media/PIN# 2¹ or setup WiFi with button5^{WPS Wifi Setup}
Select the Favourite media/PIN# 3¹ or setup Bluetooth with button4^{Bluetooth Setup}
Select the Favourite media/PIN# 4¹ or setup Bluetooth with button3^{Bluetooth Setup}
Select the Favourite media/PIN# 5¹ or setup WiFi with button2^{WPS Wifi Setup}
Select the Favourite media/PIN# 6¹ or setup Self configure with button1^{Self Configure}
Volume DOWN² - decrease volume
Volume UP ² - increase volume
Multifunction button³: Pause/Play, Mute/Unmute, Standby

Notes

1. FAVOURITE/'PIN BUTTONS¹ - Personalised media selection Pins 1-6

Click for more....

¹ A quick press of this button will select your PIN. For more information on PINS check the FAQ-What is a PIN

2. Volume button action²

Click for more....

Quick press/Tap action

Increment or decrement the volume level by one step.

Press and HOLD

continuously Increment or decrement the volume level until button has the volume level has reached 0 or maximum level.

3. Multifunction button³ - Play/Pause, Mute/Umute, Standby

Click for more....

Quick press/Tap action

Toggle between Pause/Play if you are playing a Music stream such as a Playlist, Tidal, Qobuz, Spotify
Toggle between Mute/UnMute if you are playing a Radio station, HDMI ARC input or Bluetooth connection

Press and HOLD

Go into Standby/Sleep mode

Self Configure -Configure for use with or without Series3-302 speaker

Click for more....

		Add/Remove a Partner speaker setup procedure (This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :
		1. Connect or remove the Series3-302 speaker as required:
		* Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
		* Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
		2. Press and HOLD both buttons & on the Series3-301 until half of the Volume indicator lights illuminate (More detail of the buttons and location can be found HERE
		3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup

WPS Wifi Setup -Initial setup for use with your Wifi using WPS

Click for more....

This is to setup the Wifi connection using the front panel buttons.

		WPS WIFI Setup procedure:
		1. On your ISP Router, press the *WPS* button to start the connection process.
		* Check your Router manual on how start WPS pairing.
		2. On the Series3-301 , press and HOLD buttons & until the volume indicators start moving to show a scan. (More detail of the buttons and location can be found HERE
		3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

	Alternative Wifi Setup Method via Web Browser:
	1. With the Series3-301 DSM out of Sleep mode
	2. Go to the Wireless settings on your device (e.g. iPad)
	3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
	4. Select this as the wireless network on your device (e.g. iPad)
	5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
	6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
	7. Select the Wifi network you want to connect to
	8. Enter the passkey for the Wifi network
	9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons , & for 2 seconds and this will forget your Wifi settings.

Bluetooth Setup -Initial setup to pair up your Bluetooth device, (iPhone, iPad, Alexa Echo, Android...), to the Series3-301

Click for more....

		Bluetooth Setup procedure:
		1. On the Series3-301, press and HOLD buttons & , until the volume indicator display starts it scan display (More detail of the buttons and location can be found HERE
		2. On your Bluetooth device, setup this up for pairing and look for Linn Series 3.
		3. This Bluetooth pairing process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.