Difference between revisions of "Sekrit DS-I"

MAINS INPUT - To connect to the mains electricity supply.
EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
SPEAKER OUTPUTS - To connect to loudspeakers.
ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs.
RC5 ACCESSORY - To coonect BASIK-3 & BASIK-3IR Room Control units
IR OUTPUTS - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.
RS232 PORTS - To connect to other Linn devices that don't have ethernet.
ETHERNET - To connect to a network.
DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.

Front Panel Connections

POWER SWITCH - Switches the power on/off
FALLBACK BUTTON - To put the device into Fallback mode (used when reprogramming)

LED FUNCTIONS

Text	ON indicates	OFF indicates	Slow Flash / Blink	Fast Flash
STANDBY	Device in standby	Device active	Searching for IP address (boot)	Fallback (reprogramme)
LINK	Ethernet link established	no link established	n/a	n/a
DHCP	DHCP IP address obtained	Default IP address obtained	n/a	n/a
AUDIO	Valid audio (digital inputs only)	n/a	Invalid audio (digital inputs only)	n/a
POWER AMP	Internal amplifier enabled	Internal amplifier disabled	Internal amplifier fault	n/a
RCU	Reserved for future use	Reserved for future use	Reserved for future use	n/a
SEARCH	n/a	n/a	Find me	n/a
TRANSMIT	Reserved for future use	n/a	n/a	n/a

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages or the Linn Forum.

@@ Line 150: / Line 150: @@
 Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
-* '''Unpacking''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_unpacking information] on unpacking your Sekrit DS-I.
+* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]
-* '''Positioning''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_positioning information] on positioning your Sekrit DS-I.
+* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]
+* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection  Amplifier Protection]
-* '''Important Information''' - The Sekrit DS-I features over-current and over-temperature [http://docs.linn.co.uk/wiki/index.php/amplifier_protection protection]
 For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]