Difference between revisions of "Akurate Kontrol (Ethernet)"
(→Back Panel Connections) |
(→Back Panel Connections) |
||
Line 41: | Line 41: | ||
# '''MAINS INPUT''' - To connect to the mains supply. | # '''MAINS INPUT''' - To connect to the mains supply. | ||
− | # '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve | + | # '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions. |
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming). | # '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming). | ||
# '''ETHERNET''' - To connect to a network. | # '''ETHERNET''' - To connect to a network. |
Revision as of 16:33, 13 December 2010
Contents
Product info
- Product Name: Akurate Kontrol
- Date of Introduction: November 2010
- Type: Analogue Preamplifier
- Features
Latest software
Manuals
System Setup
Recommended Network setup guide
Back Panel Connections
- MAINS INPUT - To connect to the mains supply.
- EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
- FALLBACK - To put the device into Fallback mode (used when reprogramming).
- ETHERNET - To connect to a network.
- BALANCED INPUTS - To connect sources with balanced (XLR) outputs.
- UNBALANCED INPUTS - To connect sources with unbalanced (RCA) outputs.
- PHONO INPUT - To connect a turntable source.
- PHONO GROUND - To connect to a turntable grounding terminal.
- BALANCED VARIABLE OUTPUTS - To connect to a power amplifier with balanced inputs.
- UNBALANCED VARIABLE OUTPUTS - To connect to a power amplifier with unbalanced inputs.
- UNBALANCED FIXED OUTPUTS - To connect to an analogue recording device.
Front Panel Connections
- MUTE BUTTON - Mutes/unmutes the audio
- VOLUME -/+ BUTTONS - Changes the volume up/down
- HEADPHONE OUTPUT
- FRONT PANEL DISPLAY
- AUX SOURCE INPUT
- SOURCE -/+ BUTTONS - Changes to the previous/next source
- STANDBY BUTTON - Brings the unit in/out of standby
- POWER SWITCH- Switches the power on/off
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- Unpacking - Please read the information on unpacking your Akurate Kontrol.
- Positioning - Please read the information on positioning your Akurate Kontrol.
For further assistance, try our customer support pages or the Linn Forum.