Difference between revisions of "Template:Note:Selekt DAC LEVEL"
m |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
::or | ::or | ||
::* '''Organik''' (Level-3) Stereo or Mono DAC use the higher specification <u>[[Organik_DAC | Organik DAC Architecture]]</u> | ::* '''Organik''' (Level-3) Stereo or Mono DAC use the higher specification <u>[[Organik_DAC | Organik DAC Architecture]]</u> | ||
| − | + | {{:Note:Organik_DAC_mix}} | |
| − | + | ;*{{:Warning:Selekt_Cartridge_change}} | |
| − | : | ||
| − | |||
| − | ;* | ||
Latest revision as of 08:11, 7 December 2022
- DAC's are sold seperately and ONE DAC module MUST be fitted to the the cartridge to get audio from this cartridge.
- Different DAC's modules can be used with each Selekt Cartridge.
- Either
- Standard (Level-1) Stereo DAC is the standard DAC.
- or
- Katalyst (Level-2) Stereo DAC use the higher specification Katalyst DAC Architecture
- or
- Organik (Level-3) Stereo or Mono DAC use the higher specification Organik DAC Architecture
- Either
- Only one type of DAC module can be installed in each cartridge.
- That is, You CANNOT have a Standard and a Katalyst DAC module installed in the same Line-level, Power-amplifier or Hybrid 1.1 catridge at the same time.
- These Standard and Katalyst DAC modules are interchangeable in different cartridges in the same Selekt DSM.
- However Organik DAC modules CANNOT be used with Standard and Katalyst DAC modules in different cartridges, in the same Selekt DSM
- The Organik MONO DACs can ONLY be used in the Mono Line Out Cartridge
- You CANNOT mix Organik Stereo cartridges with Organik Mono Line Out Cartridges
- Warning: Changing Selekt Cartidge(s) or Module(s).
-
- Applies to: All Selekt DSM variants
- To reduce the risk of damage to your Selekt DSM:
- The Selekt DSM MUST be disconnected from Mains power supply by BEFORE any cartridge(s) or module(s) are removed/Inserted.
