Difference between revisions of "Template:ModuleInfo:SELEKT DSM CARTRIDGE - 1Ch LINE OUT"

From LinnDocs
Jump to: navigation, search
m (SELEKT DSM CARTRIDGE - 1Ch LINE OUT)
m (SELEKT DSM CARTRIDGE - 1Ch LINE OUT)
Line 3: Line 3:
  
 
<BIG><u>Description:</u></big>
 
<BIG><u>Description:</u></big>
:Each cartridge has ONE '''line-level''' audio channel that is sold and fitted in pairs for use in left & right hand channel playback.
+
:Each cartridge has ONE '''line-level''' audio channel that are sold and fitted in pairs for use in left & right hand channel playback.
 
:Each channel has a XLR and a RCA output. <b><u>BOTH</u></b> can be used simultaneously. That is, both XLR and RCA socket are always live and do not effect each others performance.<br>
 
:Each channel has a XLR and a RCA output. <b><u>BOTH</u></b> can be used simultaneously. That is, both XLR and RCA socket are always live and do not effect each others performance.<br>
 
<br><br>
 
<br><br>

Revision as of 09:39, 2 November 2022

SELEKT DSM CARTRIDGE - 1Ch LINE OUT

Selekt Mono-LineOut-Module.png

Description:

Each cartridge has ONE line-level audio channel that are sold and fitted in pairs for use in left & right hand channel playback.
Each channel has a XLR and a RCA output. BOTH can be used simultaneously. That is, both XLR and RCA socket are always live and do not effect each others performance.



DAC - Mono Digital to Analogue Convertor module option


Option 3: Organik (Level-3)



Line Output:

RCA:

Output Level: 2V rms @volume 80

Output Impedance: 300Ω


XLR

Output Level: 4V rms @volume 80

Output Impedance:      600Ω


Note:

  • When using two of these Mono cartridges you CANNOT fit/use another cartridge within this Selekt DSM.

  • DAC's are sold seperately and ONE DAC module MUST be fitted to the the cartridge to get audio from this cartridge.
  • Different DAC's modules can be used with each Selekt Cartridge.
Either
  • Standard (Level-1) Stereo DAC is the standard DAC.
or
or
  • Only one type of DAC module can be installed in each cartridge.
That is, You CANNOT have a Standard and a Katalyst DAC module installed in the same Line-level, Power-amplifier or Hybrid 1.1 catridge at the same time.
  • These Standard and Katalyst DAC modules are interchangeable in different cartridges in the same Selekt DSM.
However Organik DAC modules CANNOT be used with Standard and Katalyst DAC modules in different cartridges, in the same Selekt DSM
  • The Organik MONO DACs can ONLY be used in the Mono Line Out Cartridge
  • You CANNOT mix Organik Stereo cartidges with Organik Mono Line Out Cartridges
  • Warning: Changing Selekt Cartidge(s) or Module(s).
Applies to: All Selekt DSM variants
To reduce the risk of damage to your Selekt DSM:
  • The Selekt DSM MUST be disconnected from Mains power supply by BEFORE any cartridge(s) or module(s) are removed/Inserted.