Difference between revisions of "Configuration:Change Configuration"

From LinnDocs
Jump to: navigation, search
m (Select Mode)
m (Change Configuration)
Line 5: Line 5:
 
[[Image:KK_Select_Mode.png| right |200px|link=]]
 
[[Image:KK_Select_Mode.png| right |200px|link=]]
 
=====<u>Select Mode</u>=====
 
=====<u>Select Mode</u>=====
This is depends on the [[:Category:Exaktbox | <u>ExaktBox</u> ]]/[[Selekt_Products|<u>Selekt</u>]]  product you are configuring.
+
For  [[:Category:Exaktbox | <u>ExaktBox</u> ]]/[[Selekt_Products|<u>Selekt</u>]]  products, typically you will have:
:Typically you will have:
 
 
::<b>Mono</b>: To work as an Exakt crossover for one loudspeaker
 
::<b>Mono</b>: To work as an Exakt crossover for one loudspeaker
 
::<b>Stereo</b>: To work as an Exakt crossover for a pair of loudspeakers
 
::<b>Stereo</b>: To work as an Exakt crossover for a pair of loudspeakers

Revision as of 08:21, 7 September 2022

Change Configuration

lEFT

KK Select Mode.png
Select Mode

For ExaktBox /Selekt products, typically you will have:

Mono: To work as an Exakt crossover for one loudspeaker
Stereo: To work as an Exakt crossover for a pair of loudspeakers
Stereo Passthrough: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.
Surround Passthrough: This defines the Surround channels assigned and what loudspeaker




Kk Select Spkr.png
Selekt Speaker
Channel: This refers to the audio channel for this/these loudspeakers.
If you have set for Mono mode above, this will show single channels, FL, FR, Cen...
All other modes will allow to setup for channels pairs and single channels.
Manufacturer: This is the Manufacturer of the speaker attached to the defined channel. E.g. Linn
Model:This is the model of the speaker attached to the defined channel. E.g. Klimax 350
(In Mono & Stereo mode this is used for the Exakt crossover profile.
In Stereo Passthrough & Surround Stereo mode this is used for Space Optimisation and speaker distancing.)
KK Add Speakers.png



In Surround Passthrough mode it will then ask you if you want to add more loudspeakers for more Surround channels


Confirmation Selection
This is to confirm your configuration and include any wiring diagrams before programming the system
The > X allows you to delete these channels from the configuration.