Difference between revisions of "Template:General:Series3-301 TI Indicators"
m |
m (→Series3 Touch Interface notifications) |
||
| Line 20: | Line 20: | ||
|- | |- | ||
| width="75px" | {{tab}} <!--Left Spacer--> | | width="75px" | {{tab}} <!--Left Spacer--> | ||
| − | | width="75px" | | + | | width="75px" | [[Image:Pin-Select-NoVol-125px.gif ]] |
|| ⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected | || ⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected | ||
|- | |- | ||
Revision as of 14:03, 18 October 2019
Series3 Touch Interface notifications
10. Volume indicator
Click for more....
- . Primarily the outer ring is the volume level indicator.
- This also has other indications:
|
⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either | |
| ⁃ Starting up, this typically takes 20-40seconds, or | ||
⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket  )
|
|
⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected |
|
Bluetooth scan in progress |
|
WiFi scan in progress |
11. Linn icon
Click for more....
Normal operation with the Series-3 playing music
Linn symbol has a lower brightness level the Series3 speakers are MUTED
Linn symbol flashing shows that the Series3 searching for a partner Series3 speaker
If you do not have a live Wifi/network/LAN connection on the Series-3 then the Linn symbol on the dial will go red.
If you are select the HDMI-ARC input or Bluetooth to the Series3 speaker this red light will go out
- If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.
