Troubleshooting:360 PWAB

No audio from the Bass loudspeaker

The 360 PWAB takes it feed from either the 4 mm Upper Bass terminals or the XLR or XLR socket. If you have not sound, check that the 360 switch is set for the correct input.

The 360 speaker also has a set of covered Exakt sockets to allow for updating the software in the Aktiv Bass amplifier. If the 360 PWAB is powered on with the Exakt-link connected, it will think it is in software upload mode and not process any analogue audio. Unplug the Exakt-link from the 360 loudspeaker and power cycle the loudspeaker, bass audio will return.