Difference between revisions of "TroubleShooting:Selekt DSM"

Revision as of 07:54, 24 October 2022

Using Konfig

1. Make sure that your Selekt DSM is powered on and connected to a network with internet access

2. In Konfig, select your DSM and go into the Exakt or Speakers tab

a) In the Speakers configuration box, click on the FALLBACK button. This will put the Selekt backplane into FALLBACK mode.

b) After a few moment press the RESTORE button on the Speaker configuration page.

c) Let it go through its steps.

3. When it's finished, power cycle the Selekt, set up the speaker info and see if normal operation has returned. If not please contact Linn Helpline

@@ Line 2: / Line 2: @@
 ===Selekt DSM does not product any sound/music from the cartridge(s)===
 ;Using Konfig
-:1. Make sure that your Selekt DSM is powered on and your LAN network has Ethernet access
+:1. Make sure that your Selekt DSM is powered on and connected to a network with internet access
 :2. In Konfig, select your DSM and go into the {{border|<b>Exakt</b>|width=5px| style2=padding:5px }} or {{border|<b>Speakers</b>|width=5px| style2=padding:5px }} tab
-::a) In the Speakers configuration box select the <span style="color:#FFFFFF;background:#000080;padding:3px"><b> FALLBACK </b></span> button. This will put the Selekt cartridge backplane into software FALLBACK mode.
+::a) In the Speakers configuration box, click on the <span style="color:#FFFFFF;background:#000080;padding:3px"><b> FALLBACK </b></span> button. This will put the Selekt backplane into FALLBACK mode.
 ::b) After a few moment press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span>   button on the Speaker configuration page.
 ::c) Let it go through its steps.