Difference between revisions of "Template:SystemDesign:Kustom DSM"

From LinnDocs
Jump to: navigation, search
m (Kustom DSM operation)
m (System Design)
Line 7: Line 7:
 
;Standard operation
 
;Standard operation
 
:The Streamer / Zone configuration should be reviewed before installation.  
 
:The Streamer / Zone configuration should be reviewed before installation.  
* :When you bring a Zone out of Standby then this automatically bring the Streamer and <b>ALL</b> Konfigured Zones of out of Standby. Therefore ONLY configure Streamer/Zones to Zones that are always connected.
+
:* When you bring a Zone out of Standby then this automatically bring the Streamer and <b>ALL</b> Konfigured Zones of out of Standby. Therefore ONLY configure Streamer/Zones to Zones that are always connected.
 
:::E.g with Bedroom and Ensuite the typical scenarion in the morning is to go into Ensuite and switch on the Radio. if the Ensuite Zone and Bedroom Zone share the same Streamer then the Bedroom zone will also play the Radio at it last volume use. This is probably not advised.
 
:::E.g with Bedroom and Ensuite the typical scenarion in the morning is to go into Ensuite and switch on the Radio. if the Ensuite Zone and Bedroom Zone share the same Streamer then the Bedroom zone will also play the Radio at it last volume use. This is probably not advised.
 
:::The solution is to have Streamer1 for the Bedroom and Streamer2 for the Ensuite. If you want to listen to the same Music then these Streamers can easily be Songcasted/Grouped/Networked together.
 
:::The solution is to have Streamer1 for the Bedroom and Streamer2 for the Ensuite. If you want to listen to the same Music then these Streamers can easily be Songcasted/Grouped/Networked together.
*: Zones within a Streamer group can be independently muted and the only umuted by either  
+
:* Zones within a Streamer group can be independently muted and the only umuted by either  
 
::*Pressing the Zone Mute button again
 
::*Pressing the Zone Mute button again
 
::*Bringing the Streamer in to/out of Standby
 
::*Bringing the Streamer in to/out of Standby

Revision as of 07:52, 4 February 2020

System Design

Kustom DSM operation

Requirements for Crestron/Control4 operation
Linn Kazoo Server with Gateway API enabled
Standard operation
The Streamer / Zone configuration should be reviewed before installation.
  • When you bring a Zone out of Standby then this automatically bring the Streamer and ALL Konfigured Zones of out of Standby. Therefore ONLY configure Streamer/Zones to Zones that are always connected.
E.g with Bedroom and Ensuite the typical scenarion in the morning is to go into Ensuite and switch on the Radio. if the Ensuite Zone and Bedroom Zone share the same Streamer then the Bedroom zone will also play the Radio at it last volume use. This is probably not advised.
The solution is to have Streamer1 for the Bedroom and Streamer2 for the Ensuite. If you want to listen to the same Music then these Streamers can easily be Songcasted/Grouped/Networked together.
  • Zones within a Streamer group can be independently muted and the only umuted by either
  • Pressing the Zone Mute button again
  • Bringing the Streamer in to/out of Standby