Difference between revisions of "Template:Setup:Series3-Wifi"

From LinnDocs
Jump to: navigation, search
m
m
 
(One intermediate revision by the same user not shown)
Line 27: Line 27:
 
||2. Go to the Wireless settings on your device (e.g. iPad)
 
||2. Go to the Wireless settings on your device (e.g. iPad)
 
|-
 
|-
||3. Find the Series-301 on the list of available networks. It will be called <b><i>Series3- <serial number></i></b>
+
||3. Find the Series-301 on the list of available networks. It will be called <big><i><font color="red">Series3- <serial number></font></i></big>
 
|-
 
|-
||4. Select this as the wireless network
+
||4. <u>Select</u> this as the wireless network on your device (e.g. iPad)
 
|-
 
|-
 
||5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
 
||5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
 
|-
 
|-
||6. The Series3 Wifi Setup page should now be displayed
+
||6. The Series3 Wifi Setup page should now be displayed <b>(if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)</b>
 
|-
 
|-
 
||7. Select the Wifi network you want to connect to
 
||7. Select the Wifi network you want to connect to

Latest revision as of 09:32, 12 September 2022

This is to setup the Wifi connection using the front panel buttons.
      Wifi-Scan-125px.gif WPS WIFI Setup procedure:
1. On your ISP Router, press the WPS button to start the connection process.
     * Check your Router manual on how start WPS pairing.
2. On the Series3-301 , press and HOLD buttons PIN-2.png & PIN-5.png until the volume indicators start moving to show a scan.
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Or
      Alternative Wifi Setup Method via Web Browser:
1. With the Series3-301 DSM out of Sleep mode
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
4. Select this as the wireless network on your device (e.g. iPad)
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons PIN-1.png, PIN-2.png & PIN-5.png for 2 seconds and this will forget your Wifi settings.