Difference between revisions of "Template:Setup:Series3-Wifi"
m |
m |
||
| Line 27: | Line 27: | ||
||2. Go to the Wireless settings on your device (e.g. iPad) | ||2. Go to the Wireless settings on your device (e.g. iPad) | ||
|- | |- | ||
| − | ||3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number> | + | ||3. Find the Series-301 on the list of available networks. It will be called <b><i>Series3- <serial number></i></b> |
|- | |- | ||
||4. Select this as the wireless network | ||4. Select this as the wireless network | ||
Revision as of 09:27, 12 September 2022
- This is to setup the Wifi connection using the front panel buttons.
|
WPS WIFI Setup procedure: | |
| 1. On your ISP Router, press the WPS button to start the connection process. | ||
| * Check your Router manual on how start WPS pairing. | ||
2. On the Series3-301 , press and HOLD buttons  &  until the volume indicators start moving to show a scan.
| ||
| 3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display. |
- Or
| Alternative Wifi Setup Method via Web Browser: | |
| 1. With the Series3-301 DSM out of Sleep mode | |
| 2. Go to the Wireless settings on your device (e.g. iPad) | |
| 3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number> | |
| 4. Select this as the wireless network | |
| 5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar | |
| 6. The Series3 Wifi Setup page should now be displayed | |
| 7. Select the Wifi network you want to connect to | |
| 8. Enter the passkey for the Wifi network | |
| 9. Click on 'Set Network' |
Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons 
, & for 2 seconds and this will forget your Wifi settings.
