Difference between revisions of "Template:ModuleInfo:SELEKT DSM CARTRIDGE - POWER OUT"
m |
m (→SELEKT DSM CARTRIDGE - POWER OUT) |
||
| Line 1: | Line 1: | ||
===<u>SELEKT DSM CARTRIDGE - POWER OUT</u>=== | ===<u>SELEKT DSM CARTRIDGE - POWER OUT</u>=== | ||
| − | + | [[File:Selekt-PowerOut-Module.jpg|150px|right]] | |
:<u>Linn part#</u> {{tab}} <b>SK CPA1</b> | :<u>Linn part#</u> {{tab}} <b>SK CPA1</b> | ||
Revision as of 08:25, 30 April 2019
SELEKT DSM CARTRIDGE - POWER OUT
- Linn part# SK CPA1
This is a module with 2off Power Amplifier channels with4mm/Banana plug terminals.
This module has a standard-level 1 Digital to Analogue Convertor.
Power Amplifier Output:
- Bridged Class-D amplifier with post-filter feedback using 4mm/Banana/binding post terminals.
| Max output power: |
|||
| 100W/channel into 4Ω load, | |||
| 50W / channel into 8Ω load | |||
| THD+N: | 0.001% | ||
| Dynamic Range | 110dB | ||
| Gain: | 20dB |
Note:
- An upgrade to the Selekt Power supply may be requried to use any new modules.
- Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.
- Some Electrostatic speakers may require a modification to work with Linn Class-D amplifier. Please refer to the speaker manufacturers website for information.
- The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (original Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.
