Template:INFO:Majik DSM/4 Phono/Analog Input Configuration

From LinnDocs
Revision as of 14:35, 21 July 2023 by Yoda (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Majik DSM/4 ships with the Configurable Analogue input set to Analogue (Line Level) as standard from the Factory. Should you wish to configure this Analogue input as a Phono Stage to be used with a Moving Magnet (MM) equipped turntable, then this can be done via either Konfig or Manage systems.

Konfig
In Konfig select the Majik DMS/4 from the list of devices on the network.
  1. Click on the Device tab and go to the Analogue input Mode option as shown below.
  2. Change this in the drop-down box from Analogue to Phono.
The Majik DSM/4 will reboot, and the setting change will take effect.
MDSM4-Konfig-MM-LINE.png



Manage Systems
You will need the Majik DSM/4 to be assigned to your Linn Account to be accessed via Manage Systems. If you have not already done this, details >HERE<.
  1. Log into your Linn Account via https://www.linn.co.uk/account.
  2. Select the Majik DSM/4 from the list of DS’s associated with your account.
  3. On the General tab, scroll down until you see the Analogue Input Mode options shown below.
  4. Change this from Analogue to Phono.

The Majik DSM/4 will reboot, and the change will take effect.


MDSM4-MANAGESYS-MM-LINE.png