Difference between revisions of "Template:FAQ;Roon FAQ"

From LinnDocs
Jump to: navigation, search
m
m
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{{1}}}
 
 
Roon uses the Linn DS/DSM as a media player, the control interface '''IS''' Roon.<br><br>
 
Roon uses the Linn DS/DSM as a media player, the control interface '''IS''' Roon.<br><br>
  
;I am only getting Airplay quality audio from the Linn DS using Roon
+
;::&bull; I cannot see any Linn DS in the <b>Audio</b> list...
:The Linn DS/DSM products have to be declared as "Networked" devices in the Roon Core settings. (The "AIRPLAY" option for the Linn DS/DSM must be disabled within the Roon Core)<br>{{{2}}}
+
:::::If you cannot see any Linn DS product in the Audio list then check that with the setup the correct Linn Streaming subnet (network address range).
 +
:::::E.g. if your Linn DS has IP address <b>192.168.1.34</b> then its subnet is <b>192.168.1.0</b>
 +
:::::::::[[image:Roon-Subnet_for_Linn.png |450px|link=]]
 +
 
 +
 
 +
;::&bull; I am only getting Airplay quality audio from the Linn DS using Roon
 +
:::::In Roon: <B><u>Settings</u></b> - <b><u>Audio</u></b> setup page, you will have devices listed with <b><i>"via Linn Streaming"</b></i> and devices listed with <b><i>"via Airplay"</b></i>.
 +
:::::Pressing this ENABLE button on <b><i>"via Linn Streaming"</b></i> will bring this Linn DS player alive.<!-- But remember to disable the same Linn product <b><i>"via Airplay"</b></i> device (Check the IP address to verify that this is the same device/Linn DS:--->
 +
:::::When you press ENABLE, this will then allow you to rename this Linn DS, otherwise it will be its default name. E.g. below the "Linn Akurate DSM" - "via Linn Streaming" has been enabled and I have renamed it "Merlin Lounge".
 +
:::::::::[[Image:Airplay-setup.png|300px | link=]]
 +
<br><br>
 +
:::::The Linn DS/DSM products have to be declared as "Roon Tested", networked devices in the Roon Core settings. (The "AIRPLAY" option for the Linn DS/DSM must be <b>disabled</b> within the Roon Core).
 +
:::::::::[[Image:Roon-Tested-setup.png|300px|link=]]
 +
:::::Click on the Roon Ready - Enable and give a name to the Linn DS/DSM. (In the example below, this has been named Merlin Lounge)<br>
 +
 
 +
 
 +
 
 +
;::&bull; I press STOP and the Roon starts playing again...
 +
:::::Transport (play / pause / stop) and Volume can be controlled using Kazoo or Ir handset. Although later versions of Roon will counteract these commands. Only use the Roon controller software to control what is playing.
 +
:::::Linn DS Firmware Davaar80 onwards will disable transport controls whilst on the Roon input of the Linn DS/DSM
 +
 
 +
 
 +
;::&bull; If I select an external source whilst playing Roon, I need to reselect the source to get it playing.
 +
:::::This can be due to a confusion, as the Roon will send a stop command to the Linn DSM as you exit the Roon source. However, as the Linn DSM will probably have changed to this new source, then this new source is stopped by Roon. On external sources, this can only be recovered by selecting another source and going back to the originally selected source.
 +
:::::The solution is to Stop or Pause the Roon source BEFORE you change to a different input on the Selekt DSM.
 +
:::::This can also be reduced by going into Konfig or Manage systems and disabling the "AutoPlay" option.

Latest revision as of 07:04, 15 August 2023

Roon uses the Linn DS/DSM as a media player, the control interface IS Roon.

• I cannot see any Linn DS in the Audio list...
If you cannot see any Linn DS product in the Audio list then check that with the setup the correct Linn Streaming subnet (network address range).
E.g. if your Linn DS has IP address 192.168.1.34 then its subnet is 192.168.1.0
Roon-Subnet for Linn.png


• I am only getting Airplay quality audio from the Linn DS using Roon
In Roon: Settings - Audio setup page, you will have devices listed with "via Linn Streaming" and devices listed with "via Airplay".
Pressing this ENABLE button on "via Linn Streaming" will bring this Linn DS player alive.
When you press ENABLE, this will then allow you to rename this Linn DS, otherwise it will be its default name. E.g. below the "Linn Akurate DSM" - "via Linn Streaming" has been enabled and I have renamed it "Merlin Lounge".
Airplay-setup.png



The Linn DS/DSM products have to be declared as "Roon Tested", networked devices in the Roon Core settings. (The "AIRPLAY" option for the Linn DS/DSM must be disabled within the Roon Core).
Roon-Tested-setup.png
Click on the Roon Ready - Enable and give a name to the Linn DS/DSM. (In the example below, this has been named Merlin Lounge)


• I press STOP and the Roon starts playing again...
Transport (play / pause / stop) and Volume can be controlled using Kazoo or Ir handset. Although later versions of Roon will counteract these commands. Only use the Roon controller software to control what is playing.
Linn DS Firmware Davaar80 onwards will disable transport controls whilst on the Roon input of the Linn DS/DSM


• If I select an external source whilst playing Roon, I need to reselect the source to get it playing.
This can be due to a confusion, as the Roon will send a stop command to the Linn DSM as you exit the Roon source. However, as the Linn DSM will probably have changed to this new source, then this new source is stopped by Roon. On external sources, this can only be recovered by selecting another source and going back to the originally selected source.
The solution is to Stop or Pause the Roon source BEFORE you change to a different input on the Selekt DSM.
This can also be reduced by going into Konfig or Manage systems and disabling the "AutoPlay" option.