Surround Sound

From LinnDocs
Revision as of 08:43, 5 September 2017 by JamieMacB (talk | contribs) (Introduction)
Jump to: navigation, search
SurroundSound.jpg

Introduction

The Davaar 55 software release introduces Surround Sound (multichannel) support to all existing DSM products that feature both HDMI and Exakt functionality. This document gives an overview of the surround feature and provides examples of the various configuration options available.

Requirements

To support surround functionality, a DSM must have an Exakt interface to allow multiple speakers to be connected. The DSM must have an HDMI interface to enable delivery of surround audio content. A 3rd party source device (ex. Blu Ray player) must be used to deliver surround audio to the DSM via HDMI. The source device must be capable of delivering (non-encoded) PCM multichannel content.

Terminology

Surround speaker configurations are expressed using two numbers separated by a dot (example "7.1"). The first number indicates the quantity of full frequency range (FFR) speakers in the system and the second number indicates the quantity of low frequency (subwoofer) speakers. A 5.2 system would therefore contain 5 FFR speakers and 2 subwoofers. Linn surround systems support a maximum of 7 FFR speakers with no limit on the number of subwoofers. Each speaker in the system has a specific role (type) which dictates the audio content that it plays.

The available FFR speaker types are:

  • Front Left (FL)
  • FrontRight (FR)
  • Surround Left (SL)
  • Surround Right (SR)
  • Rear Left (RL)
  • Rear Right (RR)
  • Centre (C)

The available subwoofer (sub) speaker types are:

  • Sub Mono (LFM)
  • Sub Left (LFL)
  • Sub Right (LFR)
  • Sub LFE (LFE)

Rules

When configuring a surround system the following rules apply:

  • No FFR duplicates: Only one of each FFR speaker type can be used.
  • No partial groups: The speaker types FL/FR, SL/SR, RL/RR, LFL/LFR must always exist in pairs.
  • Fronts must be present: FL and FR must always exist
  • No Surrounds without Rears: The RL/RR pair cannot be present if SL/SR are not present

If these rules are not adhered to, the surround speaker configuration will be invalid. The front panel will indicate this by displaying a "!" near the volume display. The audio may also be muted automatically.


Room Setup

The following diagrams show a range of typical valid surround room setups, indicating speaker types and positioning. Also shown are some invalid setups that break one or more of the rules outlined earlier.
This is setup in Konfig to assign which Exakt product is which which channel assigned below:

Symbol Key

Key (Room Setup)

Stereo 2.0

Room2-0.jpg

Stereo 2.1

Room2-1.jpg

Surround 3.1

Room3-1.jpg

Surround 4.0

Room4-0.jpg

Surround 4.1

Room4-1.jpg

Surround 5.1

Room5-1.jpg

Surround 7.1

Room7-1.jpg

Surround 7.2

Room7-2.jpg


Invalid Surround Setup (No Fronts)

RoomNoFronts.jpg

Invalid Surround Setup (No Surrounds)

RoomNoSurrounds.jpg

Invalid Surround Setup (Partial Front Group)

RoomPartialFronts.jpg

Invalid Surround Setup (Partial Surround Group)

RoomPartialSurrounds.jpg

Invalid Surround Setup (Partial Rear Group)

RoomPartialRears.jpg

Speaker Setup

In a traditional hardware surround system, speakers are assigned their type implicitly by the physical output they are connected to. With Exakt, any type can be applied to any speaker, using Konfig, regardless of how the speakers are physically connected. The following diagrams show various typical speaker connection examples for a range of surround configurations.


Symbol Key

SpeakerSetupKey.jpg


Stereo 2.0

Speaker2-0.jpg

Surround 3.1 With Non Exakt Centre and Sub

Speaker3-1Mixed.jpg

Surround 4.0 All Exakt

Speaker4-0.jpg

Surround 5.1 With Integrated Exakt Fronts

Speaker5-1.jpg

Surround 5.1 With Non Exakt Centre and Sub

Speaker5-1Mixed1.jpg

Surround 5.1 With Integrated Exakt Fronts & Surrounds, Non Exakt Centre & Sub

Speaker5-1Mixed2.jpg

Surround 7.1 With Integrated Exakt Centre And Sub

Speaker7-1IntFronts.jpg

Surround 7.1 With Integrated Exakt Fronts, Surrounds And Rears

Speaker7-1IntGroups.jpg

Surround 7.1 With Non Exakt Centre And Sub

Speaker7-1Mixed.jpg

Surround 7.1 All Exakt Box

Speaker7-1NoInt.jpg

Encoded Setups

Some HDMI source devices (e.g. Sky Q) only output encoded audio streams. To use these devices with a Linn DSM, a 3rd party AV processor or HDMI repeater must be used to decode the stream. The diagrams below indicate how these setups may be connected.

Encoded 7.1 Without Exakt

SpeakerEncodedNoExakt.jpg

Encoded 5.1 With Integrated Exakt Fronts

Speaker5-1EncodedExakt.jpg