Difference between revisions of "Surround:Decode mode"

Latest revision as of 14:32, 28 April 2023

The Decode Mode setting is applicable to audio received by the following sources:

For all modes above downmixing if required will then be performed based on the number of speakers in the system.

@@ Line 1: / Line 1: @@
-:* If Decode Mode is set to ‘Off’ then <B>stereo</b> streams will be presented in <b>stereo</b> and <b>surround</b> streams will be presented in surround, with down-mixing of the surround stream taking place to accommodate the number of speakers in the system.
+*Off - No up-mixing performed
-:* If Decode Mode is set to ‘Auto’ then <b>stereo</b> streams will be <b>up-mixed</b> to Pro-logic Surround using the automatic up-mixing algorithm in the chipset. Surround streams are presented as above.
+*Auto - PCM streams up-mixed using DTS Neo 6 Auto algorithm
-:* There are also options for ‘DTS Neo 6 Music’ and ‘DTS Neo 6 Cinema’. These are similar to ‘Auto’ but the choice here determines which algorithm is used to up-mix a stereo stream.
+*DTS Neo 6 Music - PCM streams up-mixed using DTS Neo 6 Music algorithm
+*DTS Neo 6 Video - PCM streams up-mixed using DTS Neo 6 Movie algorithm
+The Decode Mode setting is applicable to audio received by the following sources:
+*HDMI, HDMI ARC, HDMI eARC, SPDIF and Toslink
+For all modes above downmixing if required will then be performed based on the number of speakers in the system.