Difference between revisions of "Selekt: Bluetooth and Wifi"

From LinnDocs
Jump to: navigation, search
m
m
 
(8 intermediate revisions by 2 users not shown)
Line 7: Line 7:
  
 
====Setting up Wifi using the Pin buttons====
 
====Setting up Wifi using the Pin buttons====
:1. Press the WPS button on your internet router
+
:1. Remove/disconnect any cable LAN connections from the Selekt DSM
:2. Press and hold Pins 2 & 5 on the Selekt DSM until "WPS: Connecting..." appears on the front panel display
+
:2. Press the WPS button on your internet router
:3. The Selekt DSM should now automatically connect to the Wifi network
+
:3. Press and hold Pins 2 & 5 on the Selekt DSM until "WPS: Connecting..." appears on the front panel display
 +
:4. The Selekt DSM should now automatically connect to the Wifi network
  
 
* Press and hold Pins 1, 2 & 5 to forget the Wifi network
 
* Press and hold Pins 1, 2 & 5 to forget the Wifi network
  
[[File:Selekt_Dial_AllPress.jpg|right|300px]]
+
[[File:Selekt_Dial_AllPress.jpg|right|300px | link=]]
 +
 
 
====Setting up Bluetooth or Wifi using the Selekt dial====
 
====Setting up Bluetooth or Wifi using the Selekt dial====
 
:1. With the Selekt DSM out of Sleep mode
 
:1. With the Selekt DSM out of Sleep mode
Line 20: Line 22:
 
:4. Press RIGHT to select this menu
 
:4. Press RIGHT to select this menu
 
:5. Scroll UP/DOWN to highlight the desired option and RIGHT to select
 
:5. Scroll UP/DOWN to highlight the desired option and RIGHT to select
::Wifi (WPS): put your Router in to WPS discovery for auto pairing of the Selekt DSM
+
::Wifi (WPS): put your router into WPS discovery mode for auto pairing of the Selekt DSM
::WIfi (Reset): to clear any previous Wi-Fi settings
+
::WIfi (Reset): to clear any previous Wifi settings
 
::Bluetooth Pair: configure you Bluetooh device for pairing before selecting
 
::Bluetooth Pair: configure you Bluetooh device for pairing before selecting
 
:Press LEFT to cancel Service menu
 
:Press LEFT to cancel Service menu
 +
 +
 +
=== Alternative Wifi Setup Method via Web Browser ===
 +
 +
:1. With the Selekt DSM out of Sleep mode and cable/LAN connections disconnected.
 +
:2. Go to the Wireless settings on your device (e.g. iPad)
 +
:3. Find the Selekt DSM on the list of available networks. It will be called Selekt DSM - <serial number>
 +
:4. Select this as the wireless network
 +
:5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
 +
:6. The Selekt DSM Wifi Setup page should now be displayed
 +
:7. Select the Wifi network you want to connect to
 +
:8. Enter the passkey for the Wifi network
 +
:9. Click on 'Set Network'

Latest revision as of 07:48, 18 July 2023

Quick setup can be done using the Pin buttons or the Selekt dial

Setting up Bluetooth using the Pin buttons

1. Select the Bluetooth menu on your device for pairing
2. Press and hold Pins 3 & 4 on the Selekt DSM until "Bluetooth: Pairing..." appears on the front panel display
3. Select the Selekt DSM from the list of available Bluetooth devices on your device for pairing

Setting up Wifi using the Pin buttons

1. Remove/disconnect any cable LAN connections from the Selekt DSM
2. Press the WPS button on your internet router
3. Press and hold Pins 2 & 5 on the Selekt DSM until "WPS: Connecting..." appears on the front panel display
4. The Selekt DSM should now automatically connect to the Wifi network
  • Press and hold Pins 1, 2 & 5 to forget the Wifi network
Selekt Dial AllPress.jpg

Setting up Bluetooth or Wifi using the Selekt dial

1. With the Selekt DSM out of Sleep mode
2. Press dial UP to enter Service menu
3. Scroll UP/DOWN to highlight "Connect"
4. Press RIGHT to select this menu
5. Scroll UP/DOWN to highlight the desired option and RIGHT to select
Wifi (WPS): put your router into WPS discovery mode for auto pairing of the Selekt DSM
WIfi (Reset): to clear any previous Wifi settings
Bluetooth Pair: configure you Bluetooh device for pairing before selecting
Press LEFT to cancel Service menu


Alternative Wifi Setup Method via Web Browser

1. With the Selekt DSM out of Sleep mode and cable/LAN connections disconnected.
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Selekt DSM on the list of available networks. It will be called Selekt DSM - <serial number>
4. Select this as the wireless network
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Selekt DSM Wifi Setup page should now be displayed
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'