Difference between revisions of "REM 020"

From LinnDocs
Jump to: navigation, search
(Direct Source Selection)
Line 93: Line 93:
  
 
'''Using the handset'''
 
'''Using the handset'''
::*
+
::* On the DSM, go to the source that you wish to programme the remote button to.
 +
::* Press and hold the chosen source button on the handset until the DSM displays
 +
 
 
'''Using Linn Konfig'''
 
'''Using Linn Konfig'''
::*
+
::* Open Linn Konfig and select the unit you wish to update
 +
::* Open the '''Configuration''' tab
 +
::* Scroll down to the section '''Slimline Handset'''
 +
::* Select the input button you wish to change and then choose the source from the drop down list.

Revision as of 14:42, 7 October 2011

Operation with Linn DSM

The following functionality is available on Linn DSM devices with Infra-Red (IR) control. If IR is not currently enabled on the Linn DSM then this can be done via Linn Konfig.

To Enable IR

  • Open Linn Konfig
  • Select the Linn DSM
  • Select the Configuration tab
  • Set Handset Commands Accepted to All, Dvd or Cd depending on user requirement


Basic Functions

Image:remote.jpg


  1. SLEEP - Will put the unit into / out of Sleep mode.
  2. NUMERICAL KEYS - Numerical input.
  3. # - Press and hold for 2 seconds for HELP information.
  4. * - No function.
  5. NAVIGATION / SELECT - Up / down / left /right
    / enter keys for playlist navigation.
  6. DS SOURCE SELECTION - For switching between "songcast",
    "playlist" and "radio" sources on your DSM.
  7. INPUT SOURCE SELECTION - Direct source selection buttons,
    see below for default settings and how to change them.
  8. TRANSPORT CONTROLS - Play, pause, skip forward, skip back.
  9. MUTE - To mute / unmute volume.
  10. VOLUME + , - - Volume + , -.
  11. SOURCE + , - - Source + , -.
  12. INFORMATION - changes information displayed on the DSM
    front panel
  • Press and release - toggles different display modes
  • Press and hold scrolls title / artist / album information









Direct Source Selection


The default settings for the direct source selection buttons is shown below.

Product Source 1 Source 2 Source 3
Klimax DSM hdmi 1 hdmi 2 hdmi 3
Akurate DSM hdmi 1 hdmi 2 hdmi 3
Majik DSM tos 1 tos 2 tos 3
Akurate Kontrol ana 1 ana 2 ana 3
Sekrit DSI ana spdif tos



These settings can be changed either with the handset or using Linn Konfig.

Using the handset

  • On the DSM, go to the source that you wish to programme the remote button to.
  • Press and hold the chosen source button on the handset until the DSM displays

Using Linn Konfig

  • Open Linn Konfig and select the unit you wish to update
  • Open the Configuration tab
  • Scroll down to the section Slimline Handset
  • Select the input button you wish to change and then choose the source from the drop down list.