NetworkPreampConfiguration

From LinnDocs
Revision as of 15:16, 16 December 2010 by Eamonnb (talk | contribs) (Name)
Jump to: navigation, search

Introduction

This page describes in detail each of the user settings available on all Linn network preamplifiers. Certain settings may not be available on all preamps, depending on the features supported by specific product model. Available features are indicated in the product specific documentation.

User settings are divided into two categories, Control and Configuration.

Control Settings

Control settings relate to properties that may typically be modified by a user on a regular basis (e.g Volume). These settings are typically adjusted using a control point application such as KinskyDesktop.

Standby

Volume

Balance

Fade

Delay

Mute

Current Source

Configuration Settings

Configuration settings relate to properties that are normally only modified occasionally (e.g Source Name). These settings are typically adjusted using an application aimed specifically at configuration such as Konfig.

Name

This is the name of the device as it appears when queried on the network.

Room

Source Name

Source Visible

Source Unity Gain

Source Volume Offset

Source Video

Source Adc Attenuate

Source Name

Volume Limit

Startup Volume

Startup Source

Headphone Volume Offset

Delay Preset Name

Delay Preset Visible

Delay Preset Delay

Startup Source

Startup Source