Difference between revisions of "NetworkPreampConfiguration"
(→Configuration Settings) |
(→Control Settings) |
||
| Line 8: | Line 8: | ||
==Volume== | ==Volume== | ||
==Balance== | ==Balance== | ||
| − | == | + | ==Fade== |
| + | ==Delay== | ||
==Mute== | ==Mute== | ||
==Current Source== | ==Current Source== | ||
| − | |||
| − | |||
| − | |||
=Configuration Settings= | =Configuration Settings= | ||
Revision as of 11:50, 16 December 2010
Contents
- 1 Introduction
- 2 Control Settings
- 3 Configuration Settings
- 3.1 Source Name
- 3.2 Source Visble
- 3.3 Source Unity Gain
- 3.4 Source Volume Offset
- 3.5 Source Video
- 3.6 Source Adc Attenuate
- 3.7 Source Name
- 3.8 Volume Limit
- 3.9 Startup Volume
- 3.10 Startup Source
- 3.11 Headphone Volume Offset
- 3.12 Delay Preset Name
- 3.13 Delay Preset Visible
- 3.14 Delay Preset Delay
- 3.15 Startup Source
- 3.16 Startup Source
Introduction
This page describes in detail each of the user settings available on all Linn network preamplifiers. Certain settings may not be available on all preamps, depending on the features supported by specific product model. Available features are indicated in the product specific documentation.
User settings are divided into two categories, Control and Configuration. Control settings relate to properties that may typically be modified by a user on a regular basis (e.g Volume). Configuration settings relate to properties that are normally only modified occasionally (e.g Source Name).
