Difference between revisions of "Manage System:Custom-Filters"
m |
m |
||
| Line 8: | Line 8: | ||
: The Gain -5dB to +5dB, in 1dB steps, | : The Gain -5dB to +5dB, in 1dB steps, | ||
:: versus | :: versus | ||
| − | :The frequency 10<sup> | + | :The frequency 10<sup>1</sup>=10Hz, 10<sup>2</sup>=100Hz, 10<sup>3</sup>=1kHz, 10<sup>4</sup>=10kHz. |
<br> | <br> | ||
Revision as of 11:03, 17 November 2023
The Bass & treble shelf options have been introduced in to Manage systems in the ADVANCED tab (bottom of ADVANCED page). This will allow you to trim the music playback and add/attenuate the Bass and/or treble signals.
This can be used with or without Space Optimisation.
The graph shows you the frequency response graph with showing:
- The Gain -5dB to +5dB, in 1dB steps,
- versus
- The frequency 101=10Hz, 102=100Hz, 103=1kHz, 104=10kHz.
- Channel
- Front Left + Front Right : by default this is set for these channels, but click to view any other applicable channels in the system.
- Show System filters: Show any current filters applied.
- APPLY TO SYSTEM: Upload change to Linn DS/DSM.
- BASS SHELF (For all passive and/or Exakt speakers/Exaktbox channels)
- Frequency (Hz): The crossover frequency of the Bass shelf.
- Gain (dB): The gain, or attenuation, for this bass crossover point.
- TREBLE SHELF (For all passive and/or Exakt speakers/Exaktbox channels)
- Frequency (Hz): The crossover frequency of the Treble shelf.
- Gain (dB): The gain, or attenuation, for this Treble crossover point.
- SUBSONIK FILTER (for non-Exakt systems. I.e. Passive only channels)
- ADD: Allows you to add a subsonic filter on the channels selected.
- Frequency (Hz): Define the cutoff for this filter.
- RESET TO SYSTEM: Load current Custom filters for further adjustment.
- SET ALL OFF: Disable all Custom Filters
Note the Gain and frequency values can be directly entered using the keyboard by clicking on the respective number value.
