Difference between revisions of "Manage System:Custom-Filters"
m |
m |
||
| Line 9: | Line 9: | ||
::<b>Front Left + Front Right</b> : by default this is set for these channels, but will allow you to also adjust the Surround channel settings. | ::<b>Front Left + Front Right</b> : by default this is set for these channels, but will allow you to also adjust the Surround channel settings. | ||
| − | :<u><b>Show System filters</b></u>: Show any current | + | :<u><b>Show System filters</b></u>: Show any current filters applied. |
Revision as of 13:26, 15 November 2023
The Bass & treble shelf options have been introduced in to Manage systems in the ADVANCED tab (bottom of ADVANCED page). This will allow you to trim the music playback and add/attenuate the Bass and/or treble signals.
This can be used with or without Space Optimisation.
- Channel
- Front Left + Front Right : by default this is set for these channels, but will allow you to also adjust the Surround channel settings.
- Show System filters: Show any current filters applied.
- APPLY TO SYSTEM: Upload change to Linn DS/DSM.
- BASS SHELF
- Frequency (Hz): The crossover frequency of the Bass shelf.
- Gain (dB): The gain, or attenuation, for this bass crossover point.
- TREBLE SHELF
- Frequency (Hz): The crossover frequency of the Treble shelf.
- Gain (dB): The gain, or attenuation, for this Treble crossover point.
- SUBSONIC FILTER
- ADD: Allows you to add a subsonic filter on the channels selected.
- Frequency (Hz): Define the cutoff for this filter.
- RESET TO SYSTEM: Clear and reset all Custom filters.
- SET ALL OFF: Disable all Custom Filters
