Majik DS

From LinnDocs
Revision as of 14:02, 14 December 2010 by Eamonnb (talk | contribs) (Front Panel Connections)
Jump to: navigation, search
MajikDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Majik DS
  • Date of Introduction: June 2008
  • Type: Digital Stream Player.

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

Kinsky Jukebox manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Recommended DS Network setup guide


Back Panel Connections

Image:Majik_DS_rear.jpg


  1. POWER SWITCH- For switching the power to the unit on and off.
  2. MAINS INPUT - For connection to the mains supply.
  3. EARTH GROUND - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  4. ETHERNET - For connecting the unit to the network.
  5. FALLBACK - Used when reprogramming the unit.
  6. RS232 PORTS - For connection to Linn source products without ethernet ports.
  7. SPDIF OUT - For connecting to an external device with a digital electrical (coaxial) input.
  8. TOSLINK OUT - For connecting to an external device with a digital optical input.
  9. ANALOGUE AUDIO OUTPUTS - Analogue audio outputs for connecting to a pre-amplifier or directly to a power amplifier if the Internal Volume Control is enabled.


Front Panel Connections

MajikDSFront.png


  1. DISP BUTTON - Changes the front panel display mode.
  2. SKIP BUTTONS - Skips to the previous/next track
  3. STOP BUTTON - Stops playing the current track
  4. PLAY BUTTON - Starts playing the current track
  5. STANDBY BUTTON - Brings the product in/out of standby.
  6. FRONT PANEL DISPLAY


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Majik DS.
  • Positioning - Please read the information on positioning your Majik DS.


For further assistance, try our customer support pages or the Linn Forum.