Difference between revisions of "Linn Home"
Rockfather (talk | contribs) (Created page with '__NOTOC__ == DS Configuration == To install, replace or fully reset a DS within the home use the following guide * Reset device to factory defaults (for a known starting point)…') |
(No difference)
|
Revision as of 16:31, 22 March 2013
DS Configuration
To install, replace or fully reset a DS within the home use the following guide
- Reset device to factory defaults (for a known starting point)
- Update firmware to the latest shipping (non-beta) code
- Install device in the destination room
- Connect inputs/outputs and configure device as follows:
- (Configuration shows differences from factory defaults)
Kitchen
Connections
- Power
- Ethernet
- Speakers
- Basik3 RCU
Configuration
- Device
- Room -> Kitchen
- HDMI -> Disabled
- Startup Mode -> Active
- Startup Source -> Radio
- Startup Source Enabled -> Yes
- Songcast Sender
- Output Mode -> Multicast
- Preset -> ?
- Sources
- All apart from Playlist, Radio and Songcast: Visible -> No
- Tunein Radio
- Username -> linn.home
- Volume
- Startup Volume -> 45
- Startup Volume Enabled -> Yes
Bathroom
Bedroom
- TV connected to HDMI out
- Sky box connected to HDMI1
- BluRay player connected to HDMI2
Study
TV connected to TOSLINK1
Lounge
- TV connected to HDMI out
- Sky box connected to HDMI1
- BluRay player connected to HDMI2
- PS3 connected to HDMI3
Dining Room
- Swap right and left speaker cables (reverse channels) to prevent crossed over stereo imaging in the middle of the home from the lounge speakers
Network Configuration
Netgear WNR2000 Router
- WiFi disabled
- WAN port connected to main Linn network
- LAN ports connected to Cisco switches
Ubiquiti Unifi WAP
- Java control application running on MacMini
