Klimax DSM

From LinnDocs
Revision as of 12:08, 10 October 2011 by AlisonT (talk | contribs) (Front Panel Connections)
Jump to: navigation, search
KlimaDS 3Q 02 low res.jpg

Product info

  • Product Name: Klimax DSM
  • Date of Introduction: October 2011
  • Type: Digital Music Player.

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Kinsky Jukebox manual

Generic Safety Information

Network Setup

Back Panel Connections

Image:Klimax_DSM_rear.jpg


  1. MAINS INPUT - To connect to the main electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
  3. TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
  4. ETHERNET - To connect to a network.
  5. SPDIF IN - To connect sources with SPdif digital outputs.
  6. BALANCED IN RIGHT, LEFT - Analogue inputs for connecting an analogue source.
  7. BALANCED OUT RIGHT, LEFT - Line level analogue outputs for connection to a pre-amplifier.
  8. UNBALANCED OUT RIGHT, LEFT - Line level analogue outputs for connection to a pre-amplifier.
  9. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  10. HDMI IN - Line level analogue outputs for connection to a pre-amplifier.
  11. HDMI OUT - Line level analogue outputs for connection to a pre-amplifier.


Front Panel Connections

Image:Klimax_DSM_front.jpg


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Klimax DSM.
  • Positioning - Please read the information on positioning your Klimax DSM.

For further assistance, try our customer support pages or the Linn Forum.