FAQ:Klimax Solo 800

What is Adaptive Bias Control

Adaptive Bias Control technology is the control of the ideal bias current for all the amplifier output transistors. This is established dynamically and in real-time by measuring, sampling and digitising the current measurement, then using a closed loop to set the output bias voltage through a DAC and novel analogue floating bias circuit.

A digital control loop then implements and persistently adjusts this optimum bias current for the transistors; negating crossover distortion at any temperature – regardless of volume or demanding dynamic changes in music – for the entirety of the amp’s life.

Utopik for Klimax Solo 800

Linn’s all-new, Utopik switch-mode power supply topology for Klimax Solo 800 boasts precision-regulated power rails. It provides the best of both worlds, generating 2kW maximum power output whilst retaining speed, responsiveness and consummate efficiency. It maintains extremely steady output voltage; the rails perform consistently in the face of dramatic loading changes. What’s more, if the mains input varies, the output won’t – remaining stable and ultrapure at all times.

With Utopik, Linn minimise switching noise and improve efficiency by utilising a technique called ‘soft-switching’; a resonant tank circuit ensures that voltage across the switch falls to zero before the switch is thrown. Thanks to soft-switching, Utopik is cleaner, more efficient, and remains whisper-quiet over the full range of operating conditions.

Cool running

Klimax Solo 800 features superb heat management; driving the most difficult of loads without compromising linearity or resorting to an internal fan.

Excellent heat coupling is achieved by mounting the amplifier and power supply circuitry directly to the critically efficient, large surface area heatsinks. This cool-running design is key to delivering exceptional clarity right up to 800W into 4Ω, and 1.2kW into 2Ω

.

Temperature is minimised within the amp, ensuring that the properties of its internal components remain consistent during even the loudest and most demanding passages of music. It maintains consistency, efficiency and longevity at all times.

Is the Solo 800 Suitable for Any Speakers?

The Klimax Solo 800 is capable of delivering a lot of power on demand. It will deliver up to 800W into a 4 Ohm load, and up to 1.2kW into loads of 2 Ohms or less. Like any standalone mono-block power amplifier, it can only protect itself from overload. It has no knowledge of the speaker load connected to it, so it is not able to protect the speaker from currents that may damage it.

To prevent damage to the speaker, the volume should be suitably limited unless, as is sometimes the case, the loudspeaker itself includes suitable protection circuitry. If there is any doubt then seek advice from the speaker manufacturer.