Difference between revisions of "DS High End System"
| Line 1: | Line 1: | ||
==Introduction== | ==Introduction== | ||
| − | This is a recommended guide to setting up a high end DS system, requiring | + | This is a recommended guide to setting up a high end DS system, requiring all of the specified network components to be purchased, ensuring that they meet the stated specifications. |
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved. | It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved. | ||
| Line 10: | Line 10: | ||
*Network switch | *Network switch | ||
*Wireless access point | *Wireless access point | ||
| − | *NAS with media server software (Twonky or Asset UPnP) and | + | *NAS with media server software (Twonky or Asset UPnP) and backup support |
*Home computer (control point) | *Home computer (control point) | ||
*Wireless control device | *Wireless control device | ||
| Line 22: | Line 22: | ||
[[image:High1.png|centre]] | [[image:High1.png|centre]] | ||
| − | + | ||
==Step 2: Connect computer to switch== | ==Step 2: Connect computer to switch== | ||
Revision as of 14:29, 27 October 2010
Contents
Introduction
This is a recommended guide to setting up a high end DS system, requiring all of the specified network components to be purchased, ensuring that they meet the stated specifications.
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
The following components are required for the system detailed in this page:
- Router with built in DHCP server; it should also feature address reservation.
- Network switch
- Wireless access point
- NAS with media server software (Twonky or Asset UPnP) and backup support
- Home computer (control point)
- Wireless control device
- DS Players
- Network cables
Step 1: Connect router to switch
Connect the router to the switch using a standard ethernet cable.
Step 2: Connect computer to switch
Connect the home computer to the switch using a standard ethernet cable. The computer’s network adapter should be configured to ‘obtain an IP address automatically’. Configure the router to the recommended settings.
Step 3: Connect NAS to switch
Connect the NAS to the switch using a standard ethernet cable. Ensure the DHCP server is disabled on the NAS and configure the NAS to 'obtain an IP address automatically'.
Step 4: Connect DS to switch
Connect the DS player to the switch. The DS should automatically obtain its reserved IP address from the router. The system should now be connected as shown below.
Step 5: Install DS control software on computer
Once the system has been set up as shown above, the DS control software (e.g. Kinsky Desktop) must be installed on the computer. The latest Linn DS software downloads can be found here. It should now be possible to play music throught the DS.
Step 6: Add wireless access point
A wireless access point (WAP) can now be added in to the system. A wireless control device (such as a PDA, iPhone, etc.) can be used to verify that this is working.
