Difference between revisions of "DS Budget System"
| Line 14: | Line 14: | ||
*Router with built in switch and DHCP server | *Router with built in switch and DHCP server | ||
| − | |||
*Home computer (control point and media storage) | *Home computer (control point and media storage) | ||
*DS Player | *DS Player | ||
| Line 21: | Line 20: | ||
==Step 1: Connect computer to router== | ==Step 1: Connect computer to router== | ||
| − | + | If the computer already has a working internet connection then continue to step 2. | |
| − | Connect the home computer to the router | + | Connect the home computer to the router. The computer’s network adapter should be configured to ‘obtain an IP address automatically’. |
| Line 31: | Line 30: | ||
==Step 2: Add DS product to network== | ==Step 2: Add DS product to network== | ||
| − | Connect the DS product to the router. | + | Connect the DS product to the router. Power on the DS. It should automatically obtain an IP address from the router. |
| Line 37: | Line 36: | ||
| − | If the router | + | If the router does not have enough ethernet ports to connect the DS then a network switch will be required. Connect the switch to the router, then connect the computer and the DS to the switch. |
| Line 43: | Line 42: | ||
| − | + | ==Step 3: Install DS control software on computer== | |
| − | + | ||
| + | DS control software (e.g. Kinsky Desktop) must now be installed on the computer. The latest Linn DS software downloads can be found [http://www.linn.co.uk/ds_software '''here''']. | ||
| + | It should now be possible to play music throught the DS. | ||
Revision as of 09:48, 28 October 2010
Contents
Introduction
This is a recommended guide to setting up the most basic DS system, using any networking components that are already available. It requires the minimum expenditure in order to get a DS product up and running in an existing network environment.
We shall work on the assumption that you have a home computer connected to the internet via a router supplied by your service provider. If this is not the case then it will be necessary to purchase a router to set up the system. Although it is possible to use a wireless router, it is strongly recommended that you use a wired router to ensure reliable streaming of music media from the computer to the DS.
Standard ethernet cables should be used to connect each of the network components.
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
Required components
The following components are required for the system detailed in this page:
- Router with built in switch and DHCP server
- Home computer (control point and media storage)
- DS Player
- Network cables
Step 1: Connect computer to router
If the computer already has a working internet connection then continue to step 2.
Connect the home computer to the router. The computer’s network adapter should be configured to ‘obtain an IP address automatically’.
Step 2: Add DS product to network
Connect the DS product to the router. Power on the DS. It should automatically obtain an IP address from the router.
If the router does not have enough ethernet ports to connect the DS then a network switch will be required. Connect the switch to the router, then connect the computer and the DS to the switch.
Step 3: Install DS control software on computer
DS control software (e.g. Kinsky Desktop) must now be installed on the computer. The latest Linn DS software downloads can be found here. It should now be possible to play music throught the DS.
